High Performance Full Suspension Bike for Trail and Enduro Riding

Pivot Trail 429 Ride GX Transmission - Silver

The Pivot Trail 429 Ride GX Transmission - Silver is a lightweight carbon full-suspension mountain bike designed for riders who want efficient climbing, precise handling, and confident control on technical trails. Its DW-Link suspension platform combines 120 mm of rear travel with 130 mm of front travel, creating a versatile setup for fast singletrack, long trail rides, and challenging descents.

The bike's standout feature is its SRAM GX Eagle Transmission 12-speed electronic drivetrain, which provides wireless shifting across a wide 10-52T gear range. A FOX Performance 34 fork, FOX Factory Float X rear shock, SRAM DB8 four-piston brakes, DT Swiss M1900 wheels, and Maxxis Dissector 2.4-inch tires complete the trail-focused build. The documented 2024 Trail 429 range was available in Silver Metallic, along with several other colors.

Key Features

• Lightweight carbon Trail 429 frame

• DW-Link full-suspension platform

• 120 mm rear travel

• 130 mm front travel

• 29-inch wheels

• FOX Performance 34 fork with GRIP damper

• FOX Factory Float X rear shock

• SRAM GX Eagle Transmission 12-speed electronic drivetrain

• SRAM AXS Pod Controller

• SRAM GX Eagle Transmission 10-52T cassette

• SRAM GX Eagle DUB 32T crankset

• SRAM DB8 Stealth four-piston hydraulic brakes

• DT Swiss M1900 wheelset with DT Swiss 370 hubs

• Maxxis Dissector 29 × 2.4 WT tires

• SDG Tellis dropper seatpost

• 780 mm Phoenix Race Low Rise aluminum handlebar

• UDH rear derailleur hanger

• Two-position flip-chip geometry adjustment

• Internal cable routing

• Silver Metallic finish

Carbon Frame with DW-Link Suspension

The Trail 429 is built around Pivot's Hollow Core carbon frame, combining front and rear carbon triangles with the company's DW-Link suspension design.

The suspension system is tuned to provide efficient pedaling while keeping the rear wheel active over roots, rocks, and other trail obstacles. With 120 mm of rear travel, the Trail 429 sits in a versatile trail-bike category rather than being a dedicated long-travel enduro bike.

The frame also features internal cable routing, UDH compatibility, and an adjustable geometry system integrated into the upper linkage.

FOX 34 Front Fork

At the front is a FOX Performance 34 29-inch fork with a GRIP damper and 130 mm of air-sprung travel.

The 34 mm chassis provides a useful balance between steering precision and weight, while the 130 mm travel gives the front wheel enough suspension capacity for rocky and technical trail sections.

Fork Specifications

• Model: FOX Performance 34

• Wheel size: 29 inches

• Damper: GRIP

• Travel: 130 mm

• Spring: Air

FOX Factory Float X Rear Shock

The rear suspension uses a FOX Factory Float X shock with 120 mm of rear-wheel travel.

The Float X is designed for controlled suspension performance on technical terrain while working with the Trail 429's DW-Link system to maintain efficient pedaling characteristics.

Rear Suspension

• Suspension design: DW-Link

• Rear travel: 120 mm

• Shock: FOX Factory Float X

• Shock size: 165 × 45 mm

• Mount: Trunnion

SRAM GX Eagle Transmission

The Trail 429 Ride GX Transmission is equipped with SRAM's GX Eagle Transmission 12-speed electronic drivetrain.

The system uses an SRAM AXS Pod Controller and GX Eagle Transmission rear derailleur for wireless electronic shifting. The wide-range 10-52T cassette gives the rider a low climbing gear while retaining higher gears for faster trail sections.

A 32T GX Eagle DUB crankset provides a practical balance between climbing capability and speed.

Drivetrain Specifications

• Rear derailleur: SRAM GX Eagle Transmission, 12-speed

• Controller: SRAM AXS Pod Controller

• Crankset: SRAM GX Eagle DUB, 32T

• Cassette: SRAM GX 1275 Eagle Transmission, 10-52T

• Chain: SRAM GX Eagle Flattop, 12-speed

• Bottom bracket: SRAM DUB

• Configuration: 1 × 12

Electronic AXS Shifting

The wireless AXS electronic shifting system eliminates the conventional shift cable between the handlebar and rear derailleur.

The AXS Pod Controller provides the rider with electronic shift control, while the GX Eagle Transmission derailleur is designed around the Transmission cassette and UDH frame interface.

This gives the Trail 429 a clean cockpit and precise electronic shifting without relying on traditional mechanical derailleur cables.

SRAM DB8 Four-Piston Brakes

For braking, the bike uses SRAM DB8 Stealth four-piston hydraulic disc brakes.

The four-piston design provides strong braking performance and controlled modulation, particularly useful when descending steep or technical trails.

The documented build uses 180 mm SRAM Centerline six-bolt rotors at both ends.

Brake Specifications

• Brake: SRAM DB8 Stealth

• Caliper: Four-piston

• System: Hydraulic disc

• Front rotor: SRAM Centerline 180 mm

• Rear rotor: SRAM Centerline 180 mm

• Rotor mounting: 6-bolt

DT Swiss M1900 Wheelset

The Trail 429 Ride GX Transmission uses a DT Swiss M1900 29-inch wheelset with DT Swiss 370 hubs.

The 30 mm rim width works well with the bike's 2.4-inch tires and provides a suitable foundation for a modern trail-bike tire setup.

The wheelset uses 15 × 110 mm front and 12 × 157 mm SuperBoost rear axle spacing.

Wheel Specifications

• Wheel size: 29 inches

• Wheelset: DT Swiss M1900

• Hub: DT Swiss 370

• Rim width: 30 mm

• Front axle: 15 × 110 mm

• Rear axle: 12 × 157 mm SuperBoost

Maxxis Dissector 29 × 2.4 Tires

The bike is equipped with Maxxis Dissector 29 × 2.4 WT tires.

The documented specification uses TR, 3C, EXO, MaxxTerra, combining tubeless-ready construction with a trail-oriented compound and reinforced casing.

The 2.4-inch tire width provides a useful balance between rolling efficiency, cornering grip, and traction over rough terrain.

Dropper Seatpost

A SDG Tellis dropper seatpost allows the rider to lower the saddle from the handlebar before descending or entering technical sections.

Travel is size-specific:

The size-specific post lengths allow the bike to maintain appropriate saddle positioning while maximizing usable dropper travel for each frame size.

Trail-Focused Cockpit

The Trail 429 uses a Phoenix Race Low Rise Aluminum handlebar measuring 780 mm.

Stem length is matched to frame size:

• XS: 35 mm

• S: 45 mm

• M–XL: 55 mm

The cockpit also includes Phoenix Factory Lock-On grips and a Phoenix WTB Volt Race saddle.

Adjustable Geometry

The Trail 429 incorporates a two-position flip-chip in the upper linkage, allowing riders to adjust the bike's geometry to suit different trail conditions and handling preferences.

The frame can be configured in different geometry positions while retaining the same basic suspension platform.

Geometry Highlights

• Wheel size: 29 inches

• Head angle: approximately 66.5°

• Effective seat angle: approximately 75.5°

• Chainstay length: approximately 430 mm

• Adjustable via upper-link flip-chip

• UDH-compatible rear derailleur interface

Practical Frame Design

Internal Cable Routing

The Trail 429 uses Pivot's internal cable-routing system to keep brake hoses and derailleur wiring protected and give the bike a clean appearance.

UDH Compatibility

The frame uses the Universal Derailleur Hanger (UDH) standard, which is particularly relevant to the SRAM Eagle Transmission drivetrain used on this build.

Water Bottle Mounting

The frame provides practical bottle-mounting space for riders who need additional hydration during longer trail rides.

Tire Clearance

The Trail 429 platform is designed to accommodate larger-volume tires, providing room for riders who want additional traction and comfort on demanding terrain.

Common Applications

The Pivot Trail 429 Ride GX Transmission is suitable for a broad range of mountain-bike riding.

Trail Riding

• Technical singletrack

• Fast-flowing trails

• Rocky and root-filled terrain

• Long-distance trail rides

• Mixed-terrain adventures

Climbing

• Steep climbs

• Technical uphill sections

• Long sustained climbs

• Fire-road approaches

Descending

• Rocky descents

• Root-covered trails

• Steep corners

• Technical singletrack

• Moderate jumps and drops

The 120/130 mm suspension combination gives the Trail 429 a balanced character: efficient enough for long climbs while retaining enough suspension capability for demanding trail descents.

Technical Specifications

The component list above follows the documented 2024 Trail 429 Ride GX Eagle Transmission configuration.

Frame Sizes

The Trail 429 is offered in five frame sizes to accommodate a broad range of rider heights.

*Rider-height ranges are general references. Individual proportions, riding style, and preferred fit should also be considered when selecting a frame size.

Why Choose the Pivot Trail 429 Ride GX Transmission?

The Pivot Trail 429 Ride GX Transmission - Silver combines a lightweight carbon frame with efficient DW-Link suspension and modern electronic shifting.

Its 120 mm rear and 130 mm front travel provide a useful middle ground between lightweight trail efficiency and technical-terrain capability. The SRAM GX Eagle Transmission offers a wide 10-52T range, while the four-piston DB8 brakes, 29-inch DT Swiss wheels, and 2.4-inch Maxxis tires give the bike the equipment needed for demanding trail conditions.

For riders looking for one mountain bike that can handle long climbs, fast singletrack, technical terrain, and challenging descents, the Trail 429 Ride GX Transmission offers a versatile and well-balanced platform.

Configuration Note

This description is specifically for the Silver Metallic Trail 429 Ride GX Eagle Transmission configuration. It should not be confused with the similarly named Ride GX/X01 mechanical build, which uses a conventional mechanical Eagle drivetrain and a different component configuration. The 2024 electronic Transmission version is documented with the GX Transmission rear derailleur, AXS Pod Controller, GX 1275 10-52T cassette, and FOX Factory Float X shock.