High Performance Full Suspension Bike for Trail and Enduro Riding

Pivot Trail 429 Pro XT/XTR Enduro - Silver

The Pivot Trail 429 Pro XT/XTR Enduro - Silver is a premium carbon full-suspension mountain bike built for riders who want efficient climbing performance with the added confidence of an aggressive enduro-oriented front end. It combines Pivot's lightweight Hollow Core carbon frame and efficient DW-Link suspension with a 140 mm FOX Factory 36 fork, 120 mm of rear travel, and a high-end Shimano XT/XTR drivetrain.

The Enduro configuration is designed to push the Trail 429 further into technical terrain. Its longer-travel fork slackens the front end compared with the standard Trail 429, while the FOX Factory Float X rear shock, four-piston Shimano XT brakes, and DT Swiss XM1700 wheelset provide the control and durability needed for demanding trail riding.

Key Features

• Lightweight Hollow Core carbon frame

• DW-Link full-suspension platform

• 120 mm rear-wheel travel

• 140 mm front travel

• FOX Factory 36 fork with GRIP2 damper and Kashima coating

• FOX Factory Float X rear shock

• Shimano XTR M9100 12-speed rear derailleur

• Shimano XT M8100 12-speed shifter

• Shimano XT 10-51T cassette

• Race Face Aeffect R 32T crankset

• Shimano XT M8120 four-piston hydraulic brakes

• DT Swiss XM1700 29-inch wheelset

• DT Swiss 350 hubs with 36T Star Ratchet

• Maxxis Dissector 29 × 2.4 WT tires

• Fox Transfer Factory dropper seatpost

• Phoenix Team Low Rise Carbon 780 mm handlebar

• Two-position flip-chip geometry adjustment

• Super Boost 12 × 157 mm rear axle

• Internal cable routing through Pivot's Cable Port System

• Pivot Tool Dock compatibility

• Silver Metallic finish

Hollow Core Carbon Frame

The Trail 429 uses Pivot's Hollow Core carbon construction, with size-specific carbon layups designed to provide a consistent ride character across the available frame sizes.

The frame combines low weight with the stiffness needed for precise handling. Molded protection is incorporated around the down tube, seatstays, and chainstays to help protect the carbon structure from trail debris.

The frame also incorporates:

• Internal cable routing

• Super Boost rear spacing

• UDH compatibility

• ISCG-05 chain-guide mounting

• Bottle-mounting provisions

• Pivot Tool Dock mounting compatibility

• Adjustable geometry through an upper-link flip chip

DW-Link Suspension

Pivot's DW-Link suspension system is designed to deliver efficient pedaling while keeping the rear wheel active over uneven terrain.

The Trail 429 has 120 mm of rear-wheel travel, but its progressive suspension design is intended to make effective use of that travel, providing initial sensitivity while retaining support deeper in the stroke.

The Enduro configuration pairs this rear suspension with a longer 140 mm fork, giving the bike greater capability and stability on steep and technical descents.

FOX Factory 36 GRIP2 Fork

The front suspension is a FOX Factory 36 29-inch fork with a GRIP2 damper and Kashima coating.

Its 140 mm of travel is the defining feature of the Enduro configuration. The larger 36 mm chassis provides additional stiffness compared with the shorter-travel FOX 34 used on the standard Trail 429 build, while the GRIP2 damper offers extensive suspension tuning.

Fork Specifications

FOX Factory Float X Rear Shock

A FOX Factory Float X controls the bike's 120 mm rear suspension.

The trunnion-mounted shock measures 165 × 45 mm and uses a high-volume air design intended to provide a broad range of tuning and controlled performance on technical terrain.

Rear Suspension Specifications

• Shock: FOX Factory Float X

• Travel: 120 mm

• Mount: Trunnion

• Shock length: 165 mm

• Stroke: 45 mm

• Finish: Kashima

Shimano XT/XTR 12-Speed Drivetrain

The Pro XT/XTR Enduro uses a combination of Shimano's XTR and XT 12-speed components.

The Shimano XTR M9100 SGS rear derailleur provides rear shifting, while the Shimano XT M8100 I-SPEC EV shifter controls the 12-speed system.

A Shimano XT 10-51T cassette provides a wide range for steep climbs, while the Race Face Aeffect R crankset uses a 32T chainring.

Drivetrain Specifications

Shimano XT Four-Piston Brakes

For demanding descents, Pivot equips the bike with Shimano XT M8120 four-piston hydraulic disc brakes.

The four-piston calipers provide strong braking performance and controlled modulation, while 180 mm Shimano XT CenterLock rotors are used at both ends of the bike.

Brake Specifications

• Brake system: Shimano XT M8120

• Caliper: Four-piston

• Type: Hydraulic disc

• Front rotor: Shimano XT CenterLock 180 mm

• Rear rotor: Shimano XT CenterLock 180 mm

DT Swiss XM1700 Wheelset

The Trail 429 Pro XT/XTR Enduro is equipped with DT Swiss XM1700 29-inch wheels with a 30 mm rim width.

The wheelset uses DT Swiss 350 hubs, including a 36-tooth Star Ratchet freehub system. The front uses a 15 × 110 mm Boost axle, while the rear uses Pivot's 12 × 157 mm Super Boost standard.

Wheel Specifications

Maxxis Dissector Tires

The bike comes fitted with Maxxis Dissector 29 × 2.4 WT tires.

The specified version uses 3C MaxxTerra compound, EXO casing, and TR tubeless-ready construction. This combination is intended to provide a balance of cornering traction, puncture protection, and rolling performance for trail and aggressive all-mountain use.

Tire Specifications

• Model: Maxxis Dissector

• Size: 29 × 2.4 inches

• Width: Wide Trail

• Compound: 3C MaxxTerra

• Casing: EXO

• Construction: TR tubeless-ready

Fox Transfer Factory Dropper Seatpost

A Fox Transfer Factory Series dropper seatpost allows riders to lower the saddle from the handlebar before descending or tackling technical terrain.

The post is supplied in different travel lengths according to frame size:

These size-specific specifications are documented for the Silver Metallic Enduro configuration.

Carbon Trail Cockpit

The bike uses a Phoenix Team Low Rise Carbon handlebar with a 780 mm width.

The Phoenix Team Enduro/Trail stem is matched to the frame size, while Phoenix Factory Lock-On grips provide a secure connection between the rider and handlebar.

Cockpit Components

• Handlebar: Phoenix Team Low Rise Carbon

• Width: 780 mm

• Stem: Phoenix Team Enduro/Trail

• Grips: Phoenix Factory Lock-On

• Saddle: Phoenix WTB Volt Pro, Medium Width

Adjustable Geometry

The Trail 429 includes a two-position flip chip in the upper linkage. Riders can use the adjustment to change the bike's geometry toward either a more agile setup or a more stable, progressive configuration.

The 140 mm fork used on the Enduro model also changes the bike's front-end geometry compared with the standard 130 mm Trail 429. Published Enduro geometry places the head angle at approximately 65.5° in the lower setting, giving the bike additional stability on steep terrain.

Geometry Highlights

• Wheel size: 29 inches

• Rear travel: 120 mm

• Front travel: 140 mm

• Head angle: approximately 65.5° in lower setting

• Adjustable via upper-link flip chip

• Chainstay length: approximately 430–432 mm depending on configuration/source

• Super Boost rear spacing

Internal Cable Routing and Tool Dock

Pivot's Cable Port System routes cables and hoses internally while helping reduce unwanted movement and noise.

The frame is also compatible with Pivot's Tool Dock system, allowing riders to mount essential trail tools beneath the top tube.

Trail Protection

The carbon frame incorporates molded protection in key areas, including the down tube, seatstays, and chainstays. These areas are exposed to impacts from rocks, mud, and chain movement during aggressive trail riding.

Ideal Applications

The Pivot Trail 429 Pro XT/XTR Enduro is suited to riders who want a versatile bike capable of handling both long climbs and demanding descents.

Trail Riding

• Technical singletrack

• Rocky and root-filled trails

• Fast-flowing trails

• Long-distance mountain rides

Aggressive Trail Riding

• Steep descents

• Technical rock gardens

• High-speed corners

• Rough alpine trails

• Moderate jumps and drops

All-Mountain Riding

The Enduro specification gives the Trail 429 a more aggressive character than the standard Trail 429 while retaining the platform's efficient pedaling behavior.

Technical Specifications

The component specifications above correspond to the documented Trail 429 Pro XT/XTR Enduro configuration and keep its 140 mm FOX 36 / Float X setup distinct from the standard 130 mm Trail 429 build.

Frame Sizes

The Trail 429 is offered in five frame sizes to accommodate different rider heights and proportions.

These ranges are reference points rather than a substitute for a professional bike fit. Published sizing data varies slightly by model-year and source.

Why Choose the Pivot Trail 429 Pro XT/XTR Enduro?

The Pivot Trail 429 Pro XT/XTR Enduro - Silver is designed for riders who want a lightweight, efficient trail bike with enough suspension and component capability to tackle demanding terrain.

Its combination of a carbon DW-Link frame, 120 mm rear travel, 140 mm FOX Factory 36 fork, FOX Factory Float X shock, Shimano XT/XTR 12-speed drivetrain, four-piston XT brakes, and DT Swiss XM1700 wheels creates a well-rounded package for riders who climb efficiently but want extra confidence when the trail points downward.

The Silver Metallic finish gives the bike a clean, understated appearance while the premium XT/XTR and FOX Factory components provide the performance specification expected from Pivot's Pro-level Enduro build.

Configuration Note

This description is specifically for the Silver / Silver Metallic Pivot Trail 429 Pro XT/XTR Enduro configuration. It should not be confused with the standard Trail 429 Pro XT/XTR model, which uses a shorter-travel front fork. The Enduro version is distinguished primarily by its 140 mm FOX Factory 36 fork, 120 mm rear suspension, and FOX Factory Float X rear shock.