High Performance Full Suspension Bike for Trail and Enduro

Pivot Shuttle SL Pro X0 Eagle Transmission – Desert Sage Green

The Pivot Shuttle SL Pro X0 Eagle Transmission is a lightweight, high-performance electric mountain bike designed for riders who want the responsive handling of a trail bike with the added power of a modern e-bike. Finished in Desert Sage Green, this premium build combines Pivot's full-carbon Hollow Core frame with the FAZUA Ride 60 drive system, FOX Factory suspension, SRAM X0 Eagle Transmission wireless shifting, and Shimano XT four-piston brakes.

With 132 mm of DW-Link rear suspension and 150 mm of front travel, the Shuttle SL is designed to climb efficiently while remaining composed and controlled on technical descents. The motor and battery sit low and close to the center of the bike, helping preserve the lively handling that distinguishes the Shuttle SL from heavier full-power e-MTBs.

Key Features

• Full-carbon Hollow Core frame – Lightweight and stiff construction designed specifically around the Shuttle SL's trail-focused suspension and e-bike system.

• FAZUA Ride 60 drive system – Delivers up to 60 Nm of torque and 450 W of peak power.

• Integrated 430 Wh battery – Keeps the battery concealed inside the downtube while maintaining a low center of gravity.

• 132 mm DW-Link rear travel – Balances traction, efficiency, and control on varied terrain.

• 150 mm FOX Factory 36 fork – Provides additional capability for technical trails and aggressive descents.

• FOX Factory Float X shock – Controls the rear suspension with a trunnion-mounted design.

• SRAM X0 Eagle Transmission – Wireless 12-speed electronic drivetrain provides precise shifting across a 10–52T cassette.

• Shimano XT M8120 brakes – Four-piston hydraulic brakes paired with large Galfer rotors provide strong stopping power.

• DT Swiss XM1700 wheels – Durable 29-inch alloy wheels with a 30 mm internal rim width.

• Maxxis Dissector tires – 29 x 2.4-inch trail tires provide a balance of grip and rolling efficiency.

• Flip-chip geometry adjustment – Allows the rider to fine-tune the bike's handling characteristics.

• Size-specific chainstay lengths – Helps maintain balanced handling across the available frame sizes.

• Internal cable routing – Pivot's Cable Port System provides a clean cockpit and protected cable routing.

• Full-size water-bottle clearance – The front triangle accommodates a full-size bottle.

FAZUA Ride 60 Drive System

The Shuttle SL Pro uses the FAZUA Ride 60 drive unit, producing up to 60 Nm of torque and 450 W of peak power. The compact system is designed to provide useful assistance without dramatically changing the feel of the bike.

Pivot places the motor and battery low and close to the bike's center of gravity. This positioning helps the Shuttle SL retain responsive cornering and predictable handling, particularly when riding technical singletrack. The complete FAZUA motor-and-battery system weighs approximately 4.2 kg, helping keep the overall e-bike considerably lighter than many full-power alternatives.

FAZUA System Highlights

• 60 Nm maximum torque

• 450 W peak power

• 3 assist levels plus Boost mode

• Approximately 1.96 kg motor weight

• 430 Wh integrated battery

• Drag-free pedaling without motor assistance

• Magnetic charging port and cover

• FAZUA LED Hub / Ring Control interface

Integrated 430 Wh Battery

A 430 Wh FAZUA battery is integrated into the Shuttle SL's downtube. Its position keeps the weight centralized while giving the bike a clean, streamlined appearance.

The battery works with the Ride 60 motor to provide assistance for climbs and long trail rides. The system can also be configured with additional FAZUA accessories where increased range is required.

Full-Carbon Shuttle SL Frame

Pivot's Hollow Core carbon frame forms the foundation of the Shuttle SL. The frame is designed around the DW-Link suspension platform and the compact FAZUA drive system, allowing Pivot to keep the motor and battery low within the chassis.

Progressive trail geometry, a low standover height, and size-specific chainstay dimensions give the bike a combination of stability and maneuverability. The frame also incorporates Pivot's Cable Port System for internally routed cables and a full-size water bottle inside the front triangle.

FOX Factory Suspension

The front suspension uses a FOX Factory E-MTB 36 fork with 150 mm of travel, a 44 mm offset, and GRIP2 damping. The 36 mm chassis is designed to handle the increased demands of technical trail and all-mountain riding.

At the rear, a FOX Factory Float X shock works with the 132 mm DW-Link suspension platform. The combination is designed to provide traction and controlled suspension movement without sacrificing pedaling efficiency.

SRAM X0 Eagle Transmission Drivetrain

The Pro X0 build uses the SRAM X0 Eagle Transmission 12-speed electronic drivetrain. Shifting is controlled wirelessly through the SRAM AXS Pod Controller, while the X0 Eagle Transmission rear derailleur handles gear changes.

A 10–52T SRAM X0 1295 Eagle Transmission cassette provides a wide gear range for steep climbs and fast trail sections. The drivetrain uses an X0 Eagle Transmission FlatTop chain and a 34-tooth ROTOR EKAPIC E-MTB chainring.

Drivetrain Components

• SRAM X0 Eagle Transmission 12-speed rear derailleur

• SRAM AXS Pod Controller

• SRAM X0 1295 Eagle Transmission 10–52T cassette

• SRAM X0 Eagle Transmission FlatTop 12-speed chain

• ROTOR EKAPIC E-MTB 34T crankset

Shimano XT Four-Piston Brakes

The Shuttle SL Pro X0 uses Shimano XT M8120 four-piston hydraulic brakes. The brakes are paired with Galfer 203 mm front and 180 mm rear rotors.

This combination gives the bike strong braking performance for steep descents, technical terrain, and repeated braking on long downhill sections.

DT Swiss XM1700 Wheels

The bike is equipped with DT Swiss XM1700 29-inch wheels using a 30 mm internal rim width. DT Swiss 350 hubs with a 36-tooth Star Ratchet system provide the hub platform.

The wheelset uses a 15 x 110 mm front axle and 12 x 157 mm rear axle, giving the Shuttle SL a stiff and durable wheel platform for aggressive trail use.

Maxxis Dissector Tires

The bike uses Maxxis Dissector 29 x 2.4-inch WT tires with tubeless-ready construction, 3C compound, EXO casing, and MaxxTerra specification.

The Dissector is intended to provide predictable traction and cornering grip while maintaining reasonable rolling efficiency for climbing and faster trail sections.

Adjustable Geometry

The Shuttle SL features a flip-chip geometry adjustment that allows riders to tune the bike's handling. The frame also uses size-specific chainstay dimensions to maintain appropriate handling characteristics across different frame sizes.

This gives the bike flexibility for riders who prefer a more stable setup for aggressive descents or a more responsive feel for general trail riding.

Technical Specifications

These specifications correspond to the documented Pro X0 Eagle Transmission configuration in Desert Sage Green. Pivot notes that bicycle specifications can change without notice, so the final supplied bike should be checked against the applicable build sheet.

Available Frame Sizes

The Desert Sage Green Pro X0 Eagle Transmission is offered in:

• Small (SM)

• Medium (MD)

• Large (LG)

• Extra Large (XL)

FOX Transfer Dropper Post Travel

The longer dropper options help take advantage of the Shuttle SL's relatively low standover height and give riders more freedom to lower the saddle on steep terrain.

Ideal Applications

The Pivot Shuttle SL Pro X0 Eagle Transmission is designed for riders who want a premium lightweight e-MTB for:

• Technical singletrack

• Trail riding

• All-mountain riding

• Long climbing routes

• Steep descents

• Rocky and root-filled terrain

• Fast trail sections

• Extended mountain rides

• Riders seeking a natural-feeling e-bike experience

Why Choose the Shuttle SL Pro X0 Eagle Transmission?

The Shuttle SL Pro X0 Eagle Transmission focuses on low weight, efficient suspension, precise handling, and useful motor assistance rather than the bulk and output of a conventional full-power e-MTB.

The combination of the FAZUA Ride 60 motor, 430 Wh integrated battery, carbon frame, DW-Link suspension, FOX Factory suspension, SRAM X0 Eagle Transmission, Shimano XT four-piston brakes, and DT Swiss XM1700 wheels creates a premium trail machine designed to feel lively and responsive while still providing meaningful assistance on demanding climbs.

The Desert Sage Green finish adds a distinctive understated look to an already premium build, while the 29-inch wheel platform, 150 mm fork, and 132 mm rear suspension provide the capability needed for challenging modern trail riding.

Package / Bike Configuration

The complete Pro X0 Eagle Transmission configuration includes:

• Pivot Shuttle SL full-carbon frame

• FOX Factory E-MTB 36 fork

• FOX Factory Float X rear shock

• FAZUA Ride 60 motor

• FAZUA 430 Wh integrated battery

• SRAM X0 Eagle Transmission 12-speed drivetrain

• SRAM AXS Pod Controller

• Shimano XT M8120 four-piston brakes

• DT Swiss XM1700 29-inch wheelset

• DT Swiss 350 hubs

• Maxxis Dissector 29 x 2.4-inch tires

• FOX Transfer Factory dropper post

• Phoenix Team carbon handlebar

• Phoenix Team Enduro/Trail stem

• Phoenix Factory Lock-On grips

• Phoenix WTB Volt Pro saddle

Pedals are not included in the documented build specification.