High Performance Full Suspension Bike for Trail and Enduro Riding

Pivot Trail 429 Ride GX Transmission - Willow Green

The Pivot Trail 429 Ride GX Transmission - Willow Green is a high-performance carbon full-suspension mountain bike built for riders who want efficient climbing, precise handling, and confident performance on technical trails. Its lightweight carbon frame and DW-Link suspension platform combine 120 mm of rear travel with 130 mm of front travel, giving the bike a balanced setup for everything from fast singletrack to challenging descents.

At the heart of this build is SRAM's GX Eagle Transmission 12-speed electronic drivetrain, paired with a 10-52T cassette and 32T chainring. A FOX Performance 34 fork, FOX Factory Float X rear shock, four-piston SRAM DB8 brakes, DT Swiss M1900 wheels, and Maxxis Dissector 2.4-inch tires round out a capable trail-focused package.

Key Features

• Lightweight carbon Trail 429 frame

• DW-Link rear suspension

• 120 mm rear travel

• 130 mm front travel

• 29-inch wheels

• FOX Performance 34 fork with GRIP damper

• FOX Factory Float X rear shock

• SRAM GX Eagle Transmission 12-speed electronic drivetrain

• SRAM AXS Pod Controller

• SRAM GX 10-52T Eagle Transmission cassette

• SRAM DB8 Stealth four-piston hydraulic brakes

• DT Swiss M1900 wheels with DT Swiss 370 hubs

• Maxxis Dissector 29 × 2.4-inch tires

• Size-specific SDG Tellis dropper seatpost

• 780 mm Phoenix Race Low Rise aluminum handlebar

• Flip-chip adjustable geometry

• Internal cable routing

• Willow Green finish

Carbon Trail 429 Frame

The Trail 429 is built around a lightweight carbon frame designed to balance low weight with the stiffness and durability required for aggressive trail riding.

Its DW-Link suspension platform is engineered to provide efficient pedaling while keeping the rear wheel active over rough terrain. The bike's 120 mm of rear travel is paired with a longer-travel 130 mm fork, creating a short-travel trail bike that remains capable when the terrain becomes technical.

The frame also incorporates UDH hanger compatibility, internal cable routing, and a geometry-adjusting flip-chip.

120 mm DW-Link Rear Suspension

The rear suspension provides 120 mm of travel through the Trail 429's DW-Link system.

The FOX Factory Float X rear shock is designed to provide controlled suspension performance through a broad range of trail conditions. Its combination with the progressive Trail 429 suspension design helps the bike remain supportive during hard cornering, steep descents, and technical sections while still pedaling efficiently.

Rear Suspension

• Suspension platform: DW-Link

• Rear travel: 120 mm

• Rear shock: FOX Factory Float X

• Shock size: 165 × 45 mm

FOX Performance 34 Fork

Up front, the bike uses a FOX Performance 34 29-inch fork with GRIP damping and 130 mm of travel.

The 34 mm chassis offers a balance of steering precision and weight suitable for trail riding, while the 130 mm travel gives the front wheel additional capability over rocks, roots, drops, and rough descents.

Fork Specifications

• Model: FOX Performance 34

• Wheel size: 29 inches

• Damper: GRIP

• Travel: 130 mm

• Spring: Air

SRAM GX Eagle Transmission

One of the defining features of this build is the SRAM GX Eagle Transmission 12-speed drivetrain.

The Transmission system uses an electronic AXS Pod Controller and GX Eagle Transmission rear derailleur. The wide-range 10-52T cassette provides a low climbing gear while maintaining useful high-speed gearing for faster sections of trail.

The 32T GX Eagle DUB crankset gives the drivetrain a practical balance between climbing ability and trail speed.

Drivetrain

• Rear derailleur: SRAM GX Eagle Transmission, 12-speed

• Shifter: SRAM AXS Pod Controller

• Crankset: SRAM GX Eagle DUB, 32T

• Cassette: SRAM GX Eagle Transmission 10-52T

• Chain: SRAM GX Eagle Transmission Flattop, 12-speed

• Bottom bracket: SRAM DUB

• Drivetrain: 1 × 12 electronic

Four-Piston SRAM DB8 Brakes

The Trail 429 Ride GX Transmission uses SRAM DB8 four-piston hydraulic disc brakes.

Four-piston calipers provide strong braking power and controlled modulation, making them particularly useful on steep descents and technical trails.

The documented build uses 180 mm SRAM Centerline six-bolt rotors front and rear.

Brake System

• Brake model: SRAM DB8 Stealth

• Caliper: Four-piston

• Brake type: Hydraulic disc

• Front rotor: SRAM Centerline 180 mm

• Rear rotor: SRAM Centerline 180 mm

DT Swiss M1900 Wheelset

The bike is equipped with DT Swiss M1900 29-inch wheels paired with DT Swiss 370 hubs.

The 30 mm rim width provides a suitable foundation for the bike's 2.4-inch trail tires. The wheelset uses 15 × 110 mm front and 12 × 157 mm rear axle spacing.

Wheel Specifications

• Wheel size: 29 inches

• Wheelset: DT Swiss M1900

• Hub: DT Swiss 370

• Rim width: 30 mm

• Front spacing: 15 × 110 mm

• Rear spacing: 12 × 157 mm SuperBoost

Maxxis Dissector 29 × 2.4 Tires

The Trail 429 Ride GX Transmission comes fitted with Maxxis Dissector 29 × 2.4 WT tires.

The documented specification is TR, 3C, EXO, MaxxTerra, giving the bike a trail-oriented combination of grip, cornering support, and sidewall protection.

The 2.4-inch width also complements the 30 mm DT Swiss rims and the Trail 429's aggressive trail geometry.

Electronic Shifting with AXS

The SRAM AXS Pod Controller provides electronic control of the GX Eagle Transmission drivetrain.

Compared with a conventional mechanical drivetrain, the wireless electronic system eliminates the need for a traditional shift cable between the handlebar and rear derailleur. The Transmission derailleur is designed specifically for the Eagle Transmission system and works with the 10-52T cassette as a complete 12-speed setup.

Dropper Seatpost

A dropper seatpost is included to allow the rider to lower the saddle from the handlebar while descending or riding technical terrain.

Travel varies according to frame size:

*Seatpost specifications can vary by production configuration. The documented 2024 GX Transmission listing specifies 180–200 mm for Large and 210–230 mm for XL, while size-specific configurations can differ.

Trail-Focused Cockpit

The cockpit uses a Phoenix Race Low Rise Aluminum handlebar measuring 780 mm.

The Phoenix Team Enduro/Trail stem is size-specific, using shorter stems on smaller frames and a longer stem on medium through XL sizes. This helps maintain consistent handling across the size range.

Cockpit Components

• Handlebar: Phoenix Race Low Rise Aluminum, 780 mm

• Stem: Phoenix Team Enduro/Trail

• Grips: Phoenix Factory Lock-On

• Saddle: Phoenix WTB Volt Race, Medium Width

Adjustable Trail Geometry

The Trail 429 incorporates a flip-chip in the upper linkage, allowing the geometry to be adjusted for different riding preferences.

The design gives riders the option of tuning the bike toward a more aggressive, stable trail character or a more efficient and responsive configuration. The Trail 429 V3 is also designed around a modern 29-inch wheel platform.

Practical Frame Features

Internal Cable Routing

Internal cable routing keeps the cockpit and frame exterior clean while protecting cables and hoses from trail debris.

Water Bottle Mounting

The frame provides practical bottle-mounting space, making it easier to carry hydration on longer rides without relying entirely on a hydration pack.

UDH Compatibility

The Trail 429 V3 frame uses the Universal Derailleur Hanger (UDH) standard, which is compatible with the SRAM Eagle Transmission derailleur used on this build.

Tool Storage

The Trail 429 platform incorporates Pivot's Tool Dock system, providing convenient locations for carrying trail essentials without requiring a separate large storage bag.

Common Riding Applications

The Pivot Trail 429 Ride GX Transmission is designed for a wide range of mountain-bike terrain.

Trail Riding

• Technical singletrack

• Fast-flowing trails

• Rocky and root-filled terrain

• Long-distance trail rides

• Mixed-terrain adventures

Climbing

• Steep singletrack

• Long sustained climbs

• Technical uphill sections

• Fire-road approaches

Descending

• Technical descents

• Rocky trail sections

• Steep corners

• Drops and jumps appropriate for the bike's travel category

• High-speed singletrack

Its 29-inch wheels, efficient suspension, and 120/130 mm travel combination make it a versatile choice for riders who want one bike capable of both efficient climbing and confident descending.

Technical Specifications

The specification table reflects the documented Ride GX Eagle Transmission build rather than the older mechanical GX/X01 configuration.

Size-Specific Components

The Trail 429 uses some size-specific cockpit and seatpost dimensions to maintain consistent handling across the frame range.

The exact production configuration can vary by size and model-year availability, so the individual bike's size-specific specification should be confirmed before ordering.

Why Choose the Pivot Trail 429 Ride GX Transmission?

The Pivot Trail 429 Ride GX Transmission - Willow Green brings together a lightweight carbon frame, efficient DW-Link suspension, modern 29-inch wheels, and SRAM's electronic GX Eagle Transmission drivetrain.

The 120 mm rear and 130 mm front suspension provides a useful balance between pedaling efficiency and trail capability, while the four-piston DB8 brakes and 2.4-inch Maxxis tires give the bike the control needed for demanding descents.

For riders looking for a versatile trail bike that can climb efficiently, handle technical singletrack, and remain composed on fast descents, the Trail 429 Ride GX Transmission offers a well-rounded performance package.

Configuration Note

This description specifically represents the Trail 429 Ride GX Eagle Transmission / Willow Green V3-era configuration. It should not be confused with the similarly named mechanical Ride GX/X01 build, which uses a different drivetrain and, depending on model year, a different rear shock and brake configuration.