Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Metabo KNSE 9-150 6 Inch Fillet Weld Grinder Set
- $430.00
- Brands Metabo
- Product Code: 602265620
- Availability: In Stock
Metabo KNSE 9-150 6 Inch Fillet Weld Grinder Set Product Overview The Metabo KNSE 9-150 6 Inch Fillet Weld Grinder Set is a professional corded finishing tool designed specifically for grinding and finishing fillet welds, corners, and hard-to-reach areas on stainless steel and other metals. Its extended design allows the operator to reach recessed welds and narrow corners that can be difficult t..
High Performance Metabo KNSE 9-150 6 Inch Fillet Weld Grinder Set
Metabo KNSE 9-150 6 Inch Fillet Weld Grinder Set
Product Overview
The Metabo KNSE 9-150 6 Inch Fillet Weld Grinder Set is a professional corded finishing tool designed specifically for grinding and finishing fillet welds, corners, and hard-to-reach areas on stainless steel and other metals. Its extended design allows the operator to reach recessed welds and narrow corners that can be difficult to access with a conventional angle grinder.
Powered by a 950 W motor, the KNSE 9-150 provides a no-load speed of up to 3,000 RPM. Its low-profile design and specialized grinding head make it well suited for weld preparation, smoothing, blending, and finishing work in metal fabrication and stainless-steel applications.
Key Features
- 950 W motor provides reliable power for demanding metal-finishing applications.
- 6-inch / 150 mm grinding capacity accommodates large abrasive discs for efficient material removal.
- Extended grinding head improves access to inside corners and recessed fillet welds.
- Low-profile design makes the tool easier to maneuver in confined areas.
- Variable speed control allows the operator to select an appropriate speed for different materials and finishing tasks.
- Electronic speed stabilization helps maintain consistent performance under load.
- Electronic overload protection helps protect the motor from excessive operating loads.
- Soft start allows the grinder to reach operating speed more smoothly.
- Restart protection helps prevent the tool from automatically restarting after a power interruption.
- Direct-drive spindle transfers power efficiently to the grinding accessory.
- Designed for stainless steel and metal fabrication applications.
- Suitable for grinding, blending, and finishing fillet welds and corners.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Metabo |
| Model | KNSE 9-150 |
| Product Type | Fillet Weld Grinder |
| Set Type | 6-inch / 150 mm |
| Power Source | Corded Electric |
| Rated Input Power | 950 W |
| No-Load Speed | 900–3,000 RPM |
| Maximum Disc Diameter | 150 mm / 6 in. |
| Spindle Thread | M14 |
| Cable Length | Approximately 13 ft. / 4 m |
| Tool Weight | Approximately 2.7 kg / 6.0 lbs |
| Primary Application | Fillet weld and corner grinding |
| Intended Materials | Stainless steel and other metals |
Specifications may vary slightly depending on the regional version or specific order number. Verify the manufacturer's specification sheet for the exact configuration before purchase.
Designed for Fillet Weld Finishing
The KNSE 9-150 is built around a specific metalworking challenge: finishing welds in corners and recessed areas. Its specialized configuration gives the operator better access to fillet welds than a standard angle grinder.
This makes the tool useful when a weld needs to be smoothed, blended, or prepared for a subsequent finishing operation. The extended working geometry also helps reduce the need to reposition the workpiece simply to reach difficult weld locations.
Variable-Speed Control
Different metals, abrasives, and finishing operations require different operating speeds. The KNSE 9-150's adjustable speed range of approximately 900 to 3,000 RPM allows users to select a suitable speed for the job.
Lower speeds can be useful for controlled finishing and heat-sensitive applications, while higher speeds can provide faster material removal when the selected accessory and material permit it.
Professional Metalworking Applications
The Metabo KNSE 9-150 is suitable for a variety of professional fabrication and finishing tasks, including:
- Fillet weld grinding
- Inside-corner grinding
- Weld blending
- Stainless-steel finishing
- Removing weld irregularities
- Preparing welded surfaces for finishing
- Smoothing metal edges
- Fabrication and maintenance work
- Finishing difficult-to-reach metal surfaces
Ergonomic and Practical Design
A conventional grinder can be difficult to position when working inside tight corners. The KNSE 9-150 addresses this with a purpose-built grinding configuration that provides improved access to recessed areas.
Its relatively compact body and controlled speed range also make it suitable for detailed finishing work where precision and consistent results are more important than simply removing large amounts of material.
Safety and Electronic Protection
The grinder incorporates electronic systems designed to improve operating control and protect the tool during demanding work. Features such as soft start, overload protection, and restart protection help reduce the risk associated with abrupt starting, excessive loading, or power interruptions.
As with any high-speed metalworking tool, users should select an abrasive appropriate for the material and machine, follow the accessory's rated speed, and wear suitable eye, face, hearing, and respiratory protection.
What's Included
The exact contents of a KNSE 9-150 set depend on the specific Metabo order number and market configuration. A set can include the grinder along with compatible grinding accessories and a carrying/storage solution.
Always check the seller's package-content list before ordering, particularly if specific abrasive wheels, accessories, or a carrying case are required.
Why Choose the Metabo KNSE 9-150?
The Metabo KNSE 9-150 6 Inch Fillet Weld Grinder Set is a specialized solution for professionals who regularly need to grind and finish welds in corners, recessed areas, and other difficult-to-access locations. Rather than adapting a conventional grinder to the job, its dedicated design provides the reach and control needed for fillet-weld finishing.
With a 950 W motor, 150 mm grinding capacity, adjustable 900–3,000 RPM speed range, and electronic protection features, it is a practical choice for stainless-steel fabrication, welding shops, metal finishing, and industrial maintenance applications.