Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Makita 10in Dual-Bevel Sliding Compound Miter Saw
- $368.00
- Brands Makita
- Product Code: LS1019LX
- Availability: In Stock
Makita 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser and Stand The Makita LS1019LX 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser and Stand is a professional cutting system designed for framing, finish carpentry, remodeling, trim work, and general woodworking. It combines a 15-amp direct-drive motor, 10-inch blade, dual-bevel capability, sliding compound action, integrated lase..
Features of the Makita 10in Dual-Bevel Sliding Miter Saw with Laser
Makita 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser and Stand
The Makita LS1019LX 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser and Stand is a professional cutting system designed for framing, finish carpentry, remodeling, trim work, and general woodworking. It combines a 15-amp direct-drive motor, 10-inch blade, dual-bevel capability, sliding compound action, integrated laser, and folding jobsite stand in one package.
The saw uses Makita's DXT™ (Deep and Exact Cutting Technology) and a compact two-steel-rail sliding system to provide substantial cutting capacity while allowing the saw to operate close to a wall. It can handle up to 6-5/8-inch nested crown molding, 5-1/4-inch vertical baseboard, and 4x12 nominal lumber at 90°.
Key Features
- 10-inch blade: Provides a combination of cutting capacity and portability.
- 15-amp direct-drive motor: Delivers consistent power without belts that can slip or require replacement.
- 3,200 RPM no-load speed: Provides fast cutting performance.
- Dual-bevel operation: Bevels from 0° to 48° left and right.
- Wide miter range: Miter adjustments from 0° to 60° left and right.
- Integrated laser: Provides a visible reference for the line of cut.
- DXT™ cutting technology: Optimizes blade, guard, and rail design for increased cutting capacity and accuracy.
- Two-steel-rail sliding system: Reduces the rear footprint and permits operation closer to a wall.
- Linear ball-bearing system: Designed for smooth, controlled sliding movement.
- Soft-start technology: Helps provide smoother startup.
- Electronic speed control: Maintains a consistent speed under load.
- Electric brake: Helps stop the blade quickly after the trigger is released.
- Dual dust ports: Help improve dust extraction when connected to suitable collection equipment.
- Compact folding stand: Provides a stable work platform and easier jobsite transportation.
- Stand extensions: Extend to approximately 100-1/2 inches and support up to 500 lbs.
Powerful Direct-Drive Motor
The LS1019LX uses a 15-amp direct-drive motor with a maximum no-load speed of 3,200 RPM. The direct-drive design transfers power directly to the blade and eliminates the need for a drive belt.
Electronic speed control helps maintain consistent blade speed under load, while the soft-start function gradually increases motor speed to provide smoother startup and reduce initial movement.
10-Inch Blade with Large Cutting Capacity
Despite its 10-inch blade, the LS1019LX is engineered to provide cutting capacity comparable to some larger miter saws. Makita rates the saw for:
- 6-5/8 in. nested crown molding
- 5-1/4 in. vertical baseboard
- 4x12 nominal lumber at 90°
- 2-13/16 in. × 12 in. maximum crosscut capacity at 90°
- 2-13/16 in. × 8-1/2 in. maximum capacity at 45° left/right
This makes the saw well suited for large trim, molding, framing lumber, and other dimensional wood products.
Dual-Bevel and Compound Cutting
The saw can bevel 0°–48° to both the left and right, allowing compound cuts without repeatedly flipping the workpiece.
The miter mechanism provides a 0°–60° range in both directions. Positive stops are provided at 0°, 15°, 22.5°, 31.6°, 45°, and 60° left/right, making frequently used angles faster to set.
These capabilities are particularly useful for:
- Crown molding
- Baseboard
- Door and window trim
- Framing
- Cabinet components
- Deck construction
- General carpentry
- Remodeling
Integrated Laser Guide
The built-in laser provides a visual reference for the cutting line, helping the operator position the workpiece before cutting.
The laser system is particularly useful for repetitive cuts where accurate alignment and quick workpiece positioning are important.
Compact Two-Rail Sliding System
One of the LS1019LX's distinguishing features is its two-steel-rail sliding system. The rails are arranged to reduce the amount of space required behind the saw.
This allows the saw to be positioned flush against a wall, making it useful in workshops, garages, and jobsites where available floor space is limited.
The linear ball-bearing system is designed to provide smooth sliding movement with minimal deflection for consistent cuts.
DXT™ Deep and Exact Cutting Technology
Makita's DXT™ Deep and Exact Cutting Technology combines the direct-drive gearbox, blade guard, rail system, and cutting geometry to increase vertical and crosscut capacity.
The design makes it possible for this 10-inch saw to handle substantial molding and lumber while maintaining a relatively compact footprint.
Large Aluminum Base and Fences
A large aluminum base helps support the workpiece during cutting, while the integrated fence system provides additional rigidity and positioning support.
The see-through blade guard improves visibility of the blade and cutting line, helping the operator monitor the workpiece throughout the cut.
Dust Collection
The LS1019LX incorporates dual dust-collection ports designed to improve sawdust extraction. The package includes a dust bag, while a compatible vacuum can be used for higher-capacity dust collection.
For woodworking environments, connecting the saw to an appropriate dust extractor can help reduce airborne sawdust and keep the cutting area cleaner.
Folding Miter Saw Stand
The LS1019LX includes Makita's WST06 Compact Folding Miter Saw Stand. The stand uses an aluminum tubular construction and weighs approximately 33.7 lbs.
Its material-support extensions extend to approximately 100-1/2 inches and are rated to support up to 500 lbs. Large rubber wheels and a side handle make it easier to move the assembled saw around a jobsite.
Product Specifications
| Specification | Details |
|---|---|
| Brand | Makita |
| Model | LS1019LX |
| Product Type | Dual-Bevel Sliding Compound Miter Saw with Laser and Stand |
| Power Source | Corded Electric |
| Motor | 15 Amp |
| Blade Diameter | 10 in. |
| Arbor | 5/8 in. |
| No-Load Speed | 3,200 RPM |
| Miter Range | 0°–60° Left/Right |
| Bevel Range | 0°–48° Left/Right |
| Maximum Crosscut at 90° | 2-13/16 in. × 12 in. |
| Maximum Crosscut at 45° L/R | 2-13/16 in. × 8-1/2 in. |
| Crown Molding Capacity | Up to 6-5/8 in. nested |
| Baseboard Capacity | Up to 5-1/4 in. vertical |
| 4x12 Crosscut | Yes, at 90° |
| Laser Guide | Yes |
| Direct Drive | Yes |
| Soft Start | Yes |
| Electronic Speed Control | Yes |
| Electric Brake | Yes |
| Sliding System | Two-steel-rail |
| Dust Collection | Dual ports |
| Stand Included | Yes |
| Saw Dimensions | 31-3/4 × 25-3/8 × 26 in. |
| Saw Net Weight | 57.9 lbs. |
| Stand Model | WST06 |
| Stand Weight | 33.7 lbs. |
| Stand Extension | Up to 100-1/2 in. |
| Stand Capacity | Up to 500 lbs. |
Specifications are based on Makita's official LS1019LX product information and technical documentation.
What's Included
The LS1019LX package includes:
- 1 × LS1019L 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser
- 1 × WST06 Compact Folding Miter Saw Stand
- 1 × 10 in. × 5/8 in. 60T Micro-Polished Miter Saw Blade
- 1 × Vertical Vise
- 1 × Dust Bag
- 1 × Triangular Rule
- 1 × Hex Wrench
Ideal Applications
The Makita LS1019LX is suitable for:
- Finish carpentry
- Framing
- Crown molding installation
- Baseboard cutting
- Trim work
- Remodeling
- Cabinetmaking
- Deck construction
- Door and window installation
- General woodworking
- Professional construction
Why Choose the Makita LS1019LX?
The Makita 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser and Stand combines substantial cutting capacity with a compact, jobsite-friendly design. Its 15-amp direct-drive motor, 10-inch blade, dual-bevel operation, integrated laser, DXT™ cutting technology, compact rail system, and included folding stand make it a versatile solution for demanding woodworking and construction applications.
The LS1019LX is particularly attractive for users who need large molding and lumber capacity without the larger rear footprint of a conventional sliding miter saw. The included WST06 stand further improves portability and provides extended material support for longer workpieces.