Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
JET ProShop II 115V 30 Inch Rip Table Saw
- $778.00
- Brands JET
- Product Code: 725004K
- Availability: In Stock
JET ProShop II 115V 30 In. Rip Stamped Steel Table SawProduct OverviewThe JET ProShop II 115V 30 In. Rip Stamped Steel Table Saw is a contractor-style table saw built for woodworkers who need dependable cutting performance, accurate rip cuts, and a practical shop footprint. It combines a 10-inch saw blade, 1-3/4 HP induction motor, 30-inch rip capacity, and a durable cast-iron main table with stam..
Contractor Style 30 Inch Rip Table Saw for Woodworking
JET ProShop II 115V 30 In. Rip Stamped Steel Table Saw
Product Overview
The JET ProShop II 115V 30 In. Rip Stamped Steel Table Saw is a contractor-style table saw built for woodworkers who need dependable cutting performance, accurate rip cuts, and a practical shop footprint. It combines a 10-inch saw blade, 1-3/4 HP induction motor, 30-inch rip capacity, and a durable cast-iron main table with stamped-steel extension wings.
Designed for both professional and serious workshop use, the ProShop II provides the control needed for ripping lumber, cutting sheet goods, making bevel cuts, and performing a variety of general woodworking operations.
Key Features
1-3/4 HP induction motor delivers reliable power for demanding woodworking tasks.
115V single-phase operation is convenient for standard workshop electrical service.
10-inch blade capacity handles a wide range of common woodworking applications.
30-inch maximum rip capacity provides ample room for cutting larger boards and sheet materials.
Cast-iron main table provides a rigid and stable surface for accurate cutting.
Stamped-steel extension wings expand the working area while helping keep the overall machine practical for a contractor-style setup.
ProShop fence system is designed for smooth, accurate positioning and repeatable rip cuts.
Micro-adjustment capability allows fine fence positioning when precise dimensions are required.
Quick-release riving knife makes setup changes faster and easier.
Low-profile riving knife is included for compatible non-through cutting operations.
Blade guard improves protection while maintaining visibility around the cutting area.
4-inch dust port allows connection to a suitable dust-collection system.
Magnetic paddle switch provides convenient access to the machine's power control.
Single-belt drive system helps simplify maintenance and belt adjustment.
On-board accessory storage keeps commonly used components organized and accessible.
Specifications
| Specification | Details |
|---|---|
| Brand | JET |
| Product Series | ProShop II |
| Product Type | Contractor-Style Table Saw |
| Model | JPS-10 1-3/4 HP 115V 30" Rip |
| Voltage | 115V |
| Phase | Single Phase |
| Motor Power | 1-3/4 HP |
| Motor Type | Totally Enclosed Fan Cooled Induction |
| Blade Diameter | 10 in. |
| Arbor Diameter | 5/8 in. |
| Arbor Speed | 4,000 RPM |
| Maximum Rip Capacity | 30 in. |
| Maximum Rip Left of Blade | 13-1/2 in. |
| Maximum Depth of Cut at 90° | 3-1/8 in. |
| Maximum Depth of Cut at 45° | 2-1/8 in. |
| Blade Tilt | 45° Left |
| Maximum Dado Diameter | 8 in. |
| Maximum Dado Width | 13/16 in. |
| Main Table Size | 20 x 27 in. |
| Table Size with Extensions | 44 x 27 in. |
| Table Height | Approximately 34-3/4 in. |
| Main Table Material | Cast Iron |
| Extension Wing Material | Stamped Steel |
| Dust Port | 4 in. |
| Minimum Dust Collection Requirement | 350 CFM |
| Miter Gauge | T-Slot with Stops |
| Base Material | Steel |
| Warranty | 5 Years |
Specifications are based on JET's published product information for the 115V, 30-inch rip stamped-steel configuration. (acmetools.com)
Powerful 10-Inch Cutting Performance
The ProShop II is equipped with a 1-3/4 HP induction motor and a 10-inch blade running at approximately 4,000 RPM. This combination provides the cutting performance needed for everyday woodworking tasks while maintaining the straightforward operation expected from a contractor-style table saw.
The blade can tilt up to 45° to the left, allowing the saw to perform bevel cuts in addition to standard 90° cuts. Maximum cutting depth is 3-1/8 inches at 90° and 2-1/8 inches at 45°.
30-Inch Rip Capacity
A 30-inch rip capacity gives the ProShop II enough reach for many common cabinetmaking, carpentry, furniture-making, and sheet-goods applications. The fence system is designed for accurate positioning, while its micro-adjustment feature helps users make small corrections when precise rip dimensions are important.
The main 20 x 27-inch cast-iron table provides a solid cutting surface, while the stamped-steel extension wings increase the available workspace without adding the weight associated with larger cast-iron extensions.
Fence and Safety Features
The ProShop II is designed with operator convenience and cutting control in mind. Its quick-release riving knife allows the user to change configurations without unnecessarily complicating setup. A low-profile riving knife is also included for suitable non-through cutting operations.
The blade guard provides an additional layer of protection around the blade while maintaining visibility of the cutting area. A magnetic paddle switch offers a prominent and convenient means of controlling the saw.
Dust Collection
Dust management is supported by an enclosed blade shroud and a 4-inch dust port. JET recommends a dust collector capable of delivering at least 350 CFM for effective collection.
Connecting the saw to an appropriate dust-extraction system can help reduce airborne sawdust and keep the work area cleaner during extended cutting sessions.
Ideal Applications
The JET ProShop II 115V 30 In. Rip Stamped Steel Table Saw is suitable for:
Furniture making
Cabinet construction
General woodworking
Carpentry
Ripping dimensional lumber
Cutting plywood and sheet goods
Bevel cuts
Crosscutting
Dado operations
Workshop and professional shop use
Why Choose the JET ProShop II 30-Inch?
The JET ProShop II 115V 30 In. Rip Stamped Steel Table Saw is a well-rounded choice for woodworkers who want professional-oriented features without moving to a larger industrial cabinet saw. Its 1-3/4 HP motor, 10-inch blade, 30-inch rip capacity, cast-iron work surface, precision fence, and integrated safety and dust-collection features make it suitable for a broad range of woodworking applications.
The stamped-steel extension wings also provide additional support while helping maintain a practical overall machine design, making this configuration a strong fit for workshops where both performance and available floor space matter.