Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Jet J7020M 10 x 16 Horizontal Mitering Bandsaw
- $4,165.00
- Brands JET
- Product Code: 414474
- Availability: In Stock
JET J-7020M 10" x 16" Horizontal Mitering Bandsaw – 1.5 HP, 1 Phase Product Overview The JET J-7020M is a heavy-duty 10" x 16" horizontal mitering bandsaw designed for professional metalworking, fabrication, maintenance, and machine-shop applications. Its standout feature is a swiveling saw head, which allows the workpiece to remain securely clamped while the head moves to the desired cutting an..
10 x 16 Horizontal Mitering Bandsaw with Single Phase Motor
JET J-7020M 10" x 16" Horizontal Mitering Bandsaw – 1.5 HP, 1 Phase
Product Overview
The JET J-7020M is a heavy-duty 10" x 16" horizontal mitering bandsaw designed for professional metalworking, fabrication, maintenance, and machine-shop applications. Its standout feature is a swiveling saw head, which allows the workpiece to remain securely clamped while the head moves to the desired cutting angle. This makes miter cutting more convenient, particularly when handling long or heavy material.
The J-7020M uses a 1-1/2 HP, 115/230V, single-phase motor and a variable-speed drive capable of 100–350 SFPM. A hydraulic counterbalanced feed system, six-point blade guides, cast-iron wheels, coolant system, and adjustable material stop round out its professional-oriented design.
Key Features
- 10" x 16" cutting capacity: Provides substantial capacity for tubing, structural sections, bar stock, and other metal workpieces.
- Mitering head: The saw head swivels from 0° to 45°, allowing angled cuts while the workpiece stays secured in the vise.
- 1-1/2 HP single-phase motor: Provides dependable power for professional metal-cutting applications.
- 115/230V motor: Offers electrical flexibility, with the machine specified as prewired for 230V.
- Variable-speed drive: Provides a blade-speed range of 100–350 SFPM for different materials and cutting conditions.
- Six-point blade-guide system: Helps maintain blade alignment and stability during cutting.
- Hydraulic counterbalanced feed: Uses counterbalance springs and a hydraulic cylinder to control saw-head movement.
- Heavy-duty oil-bath transmission: Hardened and ground gears operate in an oil bath for continuous lubrication.
- Cast-iron blade wheels: Provide a rigid and durable wheel assembly.
- Rapid and secure workholding: The swiveling vise supports both straight and angled cutting applications.
- Coolant system: Helps cool and lubricate the blade during cutting.
- Adjustable material stop: Useful for repeat cuts where consistent part lengths are required.
- Swing-away control panel: Keeps major operating controls conveniently accessible.
- 1" bi-metal blade: Supplied as standard equipment.
Miter Cutting Without Repositioning the Material
The J-7020M is designed around a useful concept for fabrication shops: the material stays in position while the saw head moves.
The head can swivel through 45°, allowing the operator to establish angled cuts without repeatedly repositioning long or heavy workpieces. This is particularly useful when producing components for frames, brackets, supports, tubing assemblies, and other fabricated structures.
The vise itself also provides 45° swivel capability, giving the machine additional flexibility when setting up angled work.
Variable-Speed Cutting
The J-7020M's variable-speed drive provides a blade-speed range of 100–350 surface feet per minute (SFPM). This allows the operator to select an appropriate speed based on the material, blade, workpiece dimensions, and desired cutting performance.
Adjustable blade speed is especially useful in fabrication environments where the saw may be used on different grades and sizes of metal. Correct speed selection can help balance cutting efficiency, blade life, heat generation, and finish quality.
Controlled Hydraulic Feed
The saw head uses a counterbalanced feed system incorporating dual counterbalance springs and a hydraulic cylinder. This system helps regulate the rate at which the blade enters the workpiece rather than relying entirely on manual pressure.
Controlled feed is important when cutting larger sections because excessive blade pressure can increase blade wear and negatively affect cut quality.
Six-Point Blade Guide System
JET's six-contact-point blade guide system combines side bearings and carbide pads with rear load bearings mounted on a pivot shaft. The arrangement distributes blade support across multiple contact points to help maintain blade stability during demanding cuts.
This is particularly valuable when cutting heavier sections, where blade deflection can otherwise affect accuracy.
Product Specifications
| Specification | Details |
|---|---|
| Brand | JET |
| Model | J-7020M |
| Stock Number | 414474 |
| Machine Type | Horizontal Mitering Bandsaw |
| Cutting Capacity | 10" x 16" |
| Round Capacity at 90° | 10" |
| Round Capacity at 45° | 8-1/2" |
| Rectangle Capacity at 90° | 10" x 14" and 2" x 16" |
| Rectangle Capacity at 45° | 8-1/2" x 9" |
| Head Movement | 45° |
| Vise Swivel | 45° |
| Blade Size | 1" x 0.035" x 135" |
| Blade Length | 135" |
| Blade Wheel Diameter | 14" |
| Blade Speed | 100–350 SFPM |
| Drive | Variable Speed |
| Motor Power | 1-1/2 HP |
| Motor Voltage | 115/230V |
| Motor Phase | 1 Phase |
| Prewired Voltage | 230V |
| Bed Height | 25-1/2" |
| Overall Dimensions | 76" L x 30" W x 48" H |
| Net Weight | Approximately 1,134 lb |
| Feed System | Counterbalanced Hydraulic |
| Blade Guide System | Six-Point Adjustable |
| Blade Wheels | Cast Iron |
| Transmission | Hardened/Ground Gears, Oil Bath |
| Coolant System | Included |
| Material Stop | Adjustable |
| Standard Blade | 1" Bi-Metal |
JET's current specification sheet lists a 924 lb machine weight, while other JET-related product listings and the JET catalog list approximately 1,134 lb for the J-7020M. Because of this discrepancy, buyers should verify the shipping and operating weight with the supplier before arranging installation or freight. The remaining core specifications above align with JET's published specification sheet.
Typical Applications
The JET J-7020M is well suited for:
- Metal fabrication
- Structural steel preparation
- Tubing and pipe cutting
- Bar-stock cutting
- Frame fabrication
- Welding-shop preparation
- Machine-shop operations
- Maintenance and repair
- Production cutting
- Straight and mitered cuts
Efficient Repetitive Cutting
The J-7020M incorporates several features intended to reduce setup time during repetitive work. The adjustable material stop provides a repeatable reference for cutting multiple pieces to the same length, while the hydraulic feed helps maintain a controlled cutting cycle.
The combination of the variable-speed drive, rapid workholding, coolant system, and automatic feed control makes the machine well suited to shops that regularly process batches of similar components.
Why Choose the JET J-7020M?
The JET J-7020M 10" x 16" Horizontal Mitering Bandsaw is a strong choice for shops that need substantial cutting capacity combined with convenient miter-cutting capability. Its 1-1/2 HP single-phase motor, 100–350 SFPM variable-speed drive, 45° swiveling head, hydraulic counterbalanced feed, six-point blade guides, oil-bath transmission, and coolant system provide a well-rounded setup for demanding metalworking applications.
For fabrication and maintenance environments, the J-7020M offers a practical combination of cutting capacity, miter flexibility, controlled blade movement, and repeatable workpiece positioning, making it suitable for both general shop work and more demanding production tasks.