Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Kreg Single Spindle Pneumatic Pocket Hole Machine
- $1,844.00
- Brands Kreg
- Product Code: DK1100TP
- Availability: In Stock
Kreg Single-Spindle Table Pneumatic Pocket-Hole MachineProduct OverviewThe Kreg Single-Spindle Table Pneumatic Pocket-Hole Machine, model DK1100TP, is a compact benchtop production machine designed for quickly and consistently drilling pocket holes in woodworking components. It uses a pneumatic drill motor and pneumatic clamping system, with operation controlled by a convenient foot pedal.The DK11..
Features and Benefits of the Kreg Single Spindle Pneumatic Pocket Hole Machine
Kreg Single-Spindle Table Pneumatic Pocket-Hole Machine
Product Overview
The Kreg Single-Spindle Table Pneumatic Pocket-Hole Machine, model DK1100TP, is a compact benchtop production machine designed for quickly and consistently drilling pocket holes in woodworking components. It uses a pneumatic drill motor and pneumatic clamping system, with operation controlled by a convenient foot pedal.
The DK1100TP is essentially the compact benchtop version of Kreg's DK1100 pneumatic machine. Its 8-inch table height makes it easy to integrate into an existing workbench or move between work areas. With a cycle time of approximately one second, it is designed for shops that need repeatable pocket-hole production rather than occasional manual drilling.
Key Features
Single-spindle design drills one pocket hole at a time
Pneumatic drill motor and clamping provide quick, consistent operation
One-touch foot-pedal activation keeps both hands available for positioning material
Approximately 1-second cycle time supports high-volume production
1 1/4 HP pneumatic motor provides industrial-grade drilling performance
Requires an air compressor capable of delivering 8 CFM at 120 PSI at a 50% duty cycle
Hardened-steel drill guide helps support the drill bit and extend bit life
Swing Stops™ provide repeatable positioning for drilling pocket holes across rails
Adjustable fence centers the pocket hole for material from 1/2 to 1 1/2 inches thick
Clamp hold-down accommodates workpieces up to 4 inches thick
Quick-change drill bit system allows bit replacement in less than 60 seconds
Dust-collection chute helps remove chips and drilling debris
Compact benchtop design is suited to smaller workshops and production areas
Product Specifications
| Specification | Details |
|---|---|
| Brand | Kreg |
| Model | DK1100TP |
| Product Type | Benchtop Single-Spindle Pneumatic Pocket-Hole Machine |
| Machine Configuration | Benchtop |
| Spindle Count | Single |
| Drill Motor | Pneumatic |
| Clamp System | Pneumatic |
| Motor Power | 1 1/4 HP |
| Air Requirement | 8 CFM at 120 PSI |
| Duty Cycle | 50% |
| Cycle Time | Approximately 1 second |
| Material Capacity | 1/2 to 1 1/2 in. thick |
| Clamp Capacity | Up to 4 in. thick |
| Table Height | 8 in. |
| Overall Dimensions | 19 H x 24 W x 24 D in. |
| Weight | 77 lb. |
| Drill Bit Compatibility | Kreg DKDB Stepped Drill Bit |
| Included | Machine, bits and fittings, owner's manual |
| Warranty | 5 years |
Kreg's current specifications list the DK1100TP at 19 x 24 x 24 inches and 77 pounds, with an 8-inch table height.
Pneumatic Operation
The DK1100TP uses compressed air for both the drilling motor and workpiece clamping. This configuration is particularly useful for shops that already have a suitable compressed-air system.
The machine requires an air compressor capable of supplying 8 CFM at 120 PSI with a 50% duty cycle. The pneumatic system provides a fast, repeatable operating cycle while keeping the machine's electrical requirements simple.
Fast Pocket-Hole Production
The single-spindle configuration is designed to drill one pocket hole per cycle. With a cycle time of approximately one second, the machine is intended for repetitive production work where speed and consistency are important.
A foot pedal activates the operation, allowing the operator to position and hold the workpiece with both hands before initiating the drilling cycle.
Adjustable Fence
The adjustable fence allows the pocket-hole position to be centered according to the thickness of the material. Kreg specifies compatibility with material from 1/2 to 1 1/2 inches thick.
The clamp hold-down can also be adjusted to accommodate material up to 4 inches thick, providing flexibility when working with different components and assemblies.
Swing Stops™
The integrated Swing Stops™ help improve repeatability when drilling pocket holes across rails of different widths.
For rail applications, the workpiece can be positioned against one stop, drilled, and then repositioned against the other stop. When working with larger panels, the stops can swing out of the way to provide unobstructed access to the work surface.
Hardened-Steel Drill Guide
A hardened-steel drill guide supports the drill bit as it enters the workpiece. This design helps maintain consistent drilling alignment while reducing wear on the drill guide and bit during repeated production use.
The machine is compatible with Kreg's DKDB Stepped Drill Bit.
Quick Drill-Bit Changes
Changing the drill bit is designed to be a straightforward process. The collet can be loosened using the supplied Allen wrench, allowing the bit to be removed and replaced.
Kreg states that the bit-change procedure can be completed in less than 60 seconds, helping minimize downtime during production.
Dust Collection
A built-in dust-collection chute helps direct chips and drilling debris away from the work area. Connecting the appropriate dust-collection equipment can help keep the workstation cleaner and improve visibility around the drilling area.
Compact Benchtop Design
Unlike the freestanding DK1100FP, the DK1100TP is designed specifically for benchtop installation. Its 8-inch table height makes it practical for integration into an existing workbench or production table.
The compact 19 x 24 x 24-inch footprint also makes it easier to accommodate in workshops where floor space is limited.
Typical Applications
The Kreg DK1100TP is well suited for:
Furniture manufacturing
Cabinetmaking
Face-frame construction
Custom woodworking
Wood component production
Shop-based assembly
Repetitive pocket-hole drilling
Small- and medium-scale woodworking production
Kreg describes pocket-hole machines as particularly useful when large quantities of pocket holes need to be produced repeatedly and efficiently.
Benefits for Production Woodworking
Faster Workflow
The approximately one-second cycle time helps reduce the time required to drill repetitive pocket holes.
Consistent Results
The adjustable fence, clamp, drill guide, and positioning stops help create repeatable pocket-hole placement from one workpiece to the next.
Compact Installation
The benchtop format makes the machine easier to incorporate into an existing workshop layout without requiring the larger footprint of a freestanding machine.
Reduced Operator Effort
Foot-pedal operation allows the operator to initiate drilling without removing both hands from the workpiece-positioning process.
Maintenance
Regular inspection and maintenance can help preserve machine performance and extend component life. Recommended practices include:
Keep the drill guide and work area free from accumulated debris
Inspect the drill bit regularly for wear
Replace worn or damaged drill bits
Check pneumatic hoses and fittings for leaks
Maintain the required compressed-air supply
Keep moving components clean
Follow Kreg's maintenance and lubrication instructions
Disconnect the pneumatic supply before performing service or adjustments
Product Specifications at a Glance
Brand: Kreg
Model: DK1100TP
Product Type: Benchtop single-spindle pneumatic pocket-hole machine
Spindle: Single
Drive: Pneumatic
Clamping: Pneumatic
Motor: 1 1/4 HP pneumatic motor
Air Requirement: 8 CFM at 120 PSI
Duty Cycle: 50%
Cycle Time: Approximately 1 second
Material Thickness: 1/2 to 1 1/2 in.
Maximum Clamp Capacity: 4 in.
Table Height: 8 in.
Dimensions: 19 H x 24 W x 24 D in.
Weight: 77 lb.
Drill Bit: Kreg DKDB Stepped Drill Bit
Operation: Pneumatic foot pedal
Features: Adjustable fence, Swing Stops™, hardened-steel drill guide, dust-collection chute, quick bit changes
Warranty: 5 years
Primary Applications: Furniture, cabinetry, face frames, woodworking production, and repetitive pocket-hole drilling
Important Specification Note
The Kreg DK1100TP is the benchtop/table version of Kreg's DK1100 pneumatic single-spindle machine. It should not be confused with the larger freestanding DK1100FP, which has a 40-inch table height and weighs 176 pounds.
For installation, verify that the shop's compressed-air system can provide the specified 8 CFM at 120 PSI and that the workbench or mounting surface can safely support the machine's 77-pound weight.