Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Jet JJP 10BTOS 10 Inch Jointer Planer Combo with Stand
- $348.00
- Brands JET
- Product Code: 707410
- Availability: In Stock
JET JJP-10BTOS 10 in. Jointer / Planer Combo with StandThe JET JJP-10BTOS 10 in. Jointer / Planer Combo with Stand combines two essential woodworking machines into one space-saving unit. Designed for shops where floor space matters, it allows woodworkers to flatten and square boards with the jointer, then thickness them with the planer without needing two separate machines.A 13 Amp, 120 V motor dr..
10 Inch Jointer Planer Combo Machine for Precision Woodworking
JET JJP-10BTOS 10 in. Jointer / Planer Combo with Stand
The JET JJP-10BTOS 10 in. Jointer / Planer Combo with Stand combines two essential woodworking machines into one space-saving unit. Designed for shops where floor space matters, it allows woodworkers to flatten and square boards with the jointer, then thickness them with the planer without needing two separate machines.
A 13 Amp, 120 V motor drives the two-knife cutterhead at 9,000 RPM, producing up to 18,000 cuts per minute. The machine provides a 10 in. maximum jointing width, a 1/8 in. maximum jointer cut depth, and a 19.5 FPM feed rate for efficient stock preparation.
The included rigid steel stand converts the benchtop-style machine into a floor-standing setup, providing a practical working height while maintaining a relatively compact footprint.
Key Features
2-in-1 design — Combines an independent jointer and thickness planer in a single machine.
10 in. jointing capacity — Handles boards up to 10 inches wide.
13 Amp motor — Provides the power required for general woodworking and stock preparation.
Two high-speed steel knives — Designed to produce consistent, smooth cuts.
9,000 RPM cutterhead — Delivers up to 18,000 cuts per minute.
Precision-machined jointer table — Provides a smooth, flat reference surface for accurate jointing.
Large aluminum extrusion fence — Offers stable support while jointing and can be tilted for bevel cuts.
0°–45° fence adjustment — Allows both square and angled edge jointing.
Locking tables — Help maintain the selected settings during operation.
Adjustable outfeed table — Provides additional support for longer workpieces and helps reduce snipe during planing.
Oversized ergonomic controls — Make table and depth adjustments easier.
Integrated cord wrap — Helps keep the power cord organized for storage and transport.
Dual dust-port compatibility — Supports either a 2-1/2 in. shop-vac hose or a 4 in. dust-collection hose with the supplied adapter.
Included steel stand — Provides a stable floor-standing configuration without requiring a separate stand purchase.
Product Specifications
| Specification | Details |
|---|---|
| Brand | JET |
| Model | JJP-10BTOS |
| Stock Number | 707410 |
| Machine Type | Jointer / Planer Combo |
| Configuration | Benchtop machine with stand |
| Motor | 13 Amp |
| Voltage | 120 V, 60 Hz |
| Cutterhead Speed | 9,000 RPM |
| Cuts Per Minute | 18,000 CPM |
| Number of Knives | 2 |
| Knife Size | 10-1/4 x 0.65 x 0.06 in. |
| Maximum Jointer Cutting Width | 10 in. |
| Maximum Jointer Cut Depth | 1/8 in. |
| Jointer Table Size | 36 x 10-1/4 in. |
| Fence Size | 4-7/8 x 25 in. |
| Fence Tilt | 0°–45° right |
| Planer Table Size | 10-3/4 x 10-1/2 in. |
| Planer Table with Outfeed | 19-3/4 x 10-1/2 in. |
| Maximum Planing Depth of Cut | 5/64 in. |
| Maximum Stock Thickness | 4.5 in. |
| Minimum Workpiece Length | 6 in. |
| Feed Rate | 19.5 FPM |
| Dust Port | 2-1/2 or 4 in. |
| Overall Dimensions | 37-1/2 x 18-1/2 x 44 in. |
| Net Weight | 73.9 lb. |
| Gross Weight | 83.8 lb. |
| Stand | Included |
Specifications are based primarily on JET documentation and manufacturer-derived product specifications. Some online listings report slightly different dimensions or capacities, so the values above prioritize the detailed specification sheet and operating documentation.
Jointer Function
In jointer mode, the JJP-10BTOS is designed to flatten a board face and straighten its edge. Its 36 x 10-1/4 in. jointer table provides a substantial reference surface, while the aluminum fence helps keep the workpiece properly aligned.
The jointer can remove up to 1/8 in. per pass, with the cutting depth adjusted through the infeed-table control. The fence can remain at 90° for standard edge jointing or be tilted up to 45° to create bevels.
Planer Function
After a board has been flattened, the planer section can be used to bring it to a consistent thickness. The planer accepts stock up to approximately 4-1/2 inches thick and provides a maximum depth of cut of 5/64 inch per pass.
The 19.5 FPM feed rate moves material through the cutterhead at a controlled rate, while the adjustable outfeed table provides support as the workpiece exits the machine.
Cutterhead and Cutting Performance
The JJP-10BTOS uses a two-knife high-speed steel cutterhead. Operating at 9,000 RPM, it produces up to 18,000 cuts per minute. The knife dimensions are 10-1/4 x 0.65 x 0.06 inches, providing the cutting width required for the machine's 10-inch jointing capacity.
The straight-knife configuration is particularly practical for general-purpose woodworking because the knives can be adjusted or replaced when required.
Stable Stand and Space-Saving Design
Unlike a conventional benchtop machine that requires a separate support system, the JJP-10BTOS includes its steel stand. The stand provides a stable floor-standing configuration while preserving the machine's relatively compact footprint.
The machine can therefore work well in smaller professional shops, hobby workshops, garages, and other woodworking environments where dedicating floor space to separate jointer and planer machines is difficult.
Dust Collection
The included dust-collection adapter supports 2-1/2 in. and 4 in. hose connections, allowing the JJP-10BTOS to work with either a shop vacuum or a larger dust-collection system. The same dust-collection arrangement is used for both jointing and planing operations.
Effective dust collection is especially useful when planing, as the cutterhead generates a substantial amount of wood chips and fine dust.
Recommended Applications
The JET JJP-10BTOS is suitable for a range of woodworking tasks, including:
Preparing rough-sawn lumber
Flattening board faces
Straightening board edges
Creating square reference edges
Thickness planing
Producing consistent board thicknesses
Making bevel cuts on board edges
Furniture and cabinet construction
General workshop woodworking
Small-shop and garage woodworking projects
Why Choose the JET JJP-10BTOS?
The main advantage of the JET JJP-10BTOS is its ability to perform two fundamental stock-preparation operations in one machine. Instead of allocating space and budget for a separate jointer and planer, woodworkers can use one compact unit for both functions.
With its 10 in. capacity, 13 Amp motor, 9,000 RPM two-knife cutterhead, precision-machined tables, adjustable aluminum fence, dust-collection compatibility, and included steel stand, the JJP-10BTOS provides a practical combination of capacity and shop efficiency.
For woodworkers who need more capacity than a smaller benchtop combo while still wanting to conserve workshop space, the JJP-10BTOS is a versatile solution for flattening, edge jointing, and thickness planing lumber.