Features and Benefits of Laguna Tools DP20 20 Inch Drill Press

Laguna Tools DP:20 20-Inch Drill Press Touchscreen Floor Model

Product Overview

The Laguna Tools DP:20 20-Inch Drill Press is a floor-standing drill press designed to bring industrial-style drilling capability together with modern digital controls. It features a 1.5 HP PWM motor, electronic variable speed from 60 to 3,600 RPM, a full-function LCD touchscreen Smart Panel, 6 inches of quill travel, and a large cast-iron worktable.

Designed for both woodworking and metalworking, the DP:20 provides precise speed and depth control while adding practical features such as crosshair laser alignment, a 5W LED work light, programmable memory settings, Auto-Start, and Auto Reverse for tapping applications.

Key Features

• 20-inch swing capacity
• 1.5 HP PWM motor
• 110–120V AC, single phase
• Electronic variable speed from 60–3,600 RPM
• Forward and reverse operation
• Large LCD touchscreen Smart Panel
• Electronic drilling-depth control
• 5 programmable memory settings
• Auto-Start function
• Auto Reverse function for tapping
• 6-inch quill travel
• MT2 spindle taper
• 5/64"–5/8" chuck capacity
• 15" x 22" cast-iron worktable
• Table tilts 90° left and right
• Table swivels 360° around the column
• Three T-slots
• Ten clamping holes
• Crosshair laser positioning
• Integrated 5W LED work light
• Quick-ratio T-handle quill control
• Chuck-key holder with safety sensor
• Heavy-duty cast-iron construction

Product Specifications

Specifications are based on Laguna Tools' current DP:20 documentation and product information.

1.5 HP PWM Motor

At the heart of the DP:20 is a 1.5 HP Pulse Width Modulation (PWM) motor designed to maintain consistent torque across its broad electronic speed range.

The spindle can operate from 60 to 3,600 RPM, giving the operator considerably more control over drilling speed than a conventional stepped-pulley drill press. Forward and reverse operation is also available.

This variable-speed capability makes the DP:20 suitable for a wide range of materials and drilling operations, including woodworking, metalworking, plastics, and tapping applications.

Touchscreen Smart Panel

The DP:20's most distinctive feature is its LCD touchscreen Smart Panel.

The digital interface provides access to machine functions and displays information such as:

• Spindle RPM
• Load
• Quill depth
• Speed settings
• Depth settings
• Material zero
• Forward/reverse operation
• Auto-Start
• Memory programs

The display can show measurements in fractional inches, decimal inches, or millimeters, allowing the operator to select the format most appropriate for the application.

Programmable Memory Settings

The control system provides five programmable memory settings.

These presets allow frequently used speed and depth combinations to be saved and recalled, which can be especially useful for repetitive drilling operations or small-batch production.

Electronic Depth Control

The DP:20 provides both electronic depth setting and a traditional mechanical depth stop.

Digital depth information is displayed directly on the touchscreen, allowing the operator to monitor drilling depth during operation. Laguna also provides selectable measurement formats and a zeroing function for establishing a new reference point.

This combination of electronic and mechanical depth control gives the machine flexibility for both repeat production work and conventional manual drilling.

Auto-Start and Auto Reverse

The Auto-Start function automatically starts the drill press as the quill is lowered and stops it as the quill is raised.

The Auto Reverse function is intended specifically for tapping applications. When a preset depth is reached, the spindle can automatically reverse to help withdraw the tap from the workpiece.

These features can reduce repetitive manual control and make the machine particularly useful for production-oriented work.

20-Inch Swing

With a 20-inch swing, the DP:20 provides substantial clearance between the spindle centerline and column.

This capacity is useful when positioning larger workpieces beneath the drill bit, particularly when working with wide panels, large metal components, furniture parts, and other oversized stock.

6-Inch Quill Travel

The DP:20 provides 6 inches of quill travel, giving it considerable drilling depth capability for a floor-model machine.

The ergonomic T-handle incorporates a quick gear ratio that moves the quill through its full 6-inch travel in approximately half a revolution of the handle, according to Laguna Tools.

Large Cast-Iron Worktable

The machine is equipped with a substantial 15" x 22" cast-iron table.

The table incorporates:

• Three T-slots
• Ten clamping holes
• 90° tilt capability in both directions
• 360° rotation around the column

The combination of T-slots and clamping holes provides multiple ways to secure workpieces and fixtures.

Adjustable Table

The table can tilt 90° to the left or right and rotate 360° around the column.

This flexibility allows the DP:20 to accommodate angled drilling operations and different workpiece orientations without requiring the entire machine to be repositioned.

Crosshair Laser Alignment

A built-in crosshair laser system helps indicate the drilling location on the workpiece.

The laser emitters are positioned on both sides of the machine and can be adjusted to create a visible crosshair at the intended drilling point.

This is particularly useful when drilling repeated holes or positioning holes accurately before lowering the quill.

Integrated LED Work Light

A built-in 5W LED work light illuminates the drilling area.

The additional lighting helps improve visibility around the drill bit and workpiece, particularly in larger workshops where ambient lighting may not provide sufficient illumination.

Chuck and MT2 Spindle

The DP:20 uses an MT2 spindle taper and accepts drill bits through a chuck with a capacity of 5/64 to 5/8 inch (2–16 mm).

This range accommodates common drill sizes used in both woodworking and general metalworking.

A built-in chuck-key holder keeps the chuck key conveniently positioned on the machine. Its sensor also provides a safety function that prevents Auto-Start operation while the chuck key is being used for bit changes.

Heavy-Duty Floor Construction

The DP:20 is designed as a floor-standing machine with a 3.15-inch (80 mm) column, substantial cast-iron components, and a footprint of approximately 22.83" x 16.92".

The overall machine height is approximately 72.25 inches, making it important to account for adequate overhead clearance during installation.

Typical Applications

The Laguna Tools DP:20 is suitable for:

• Professional woodworking
• Furniture manufacturing
• Cabinetmaking
• Metalworking
• Precision drilling
• Repetitive drilling
• Tapping applications
• Plastic fabrication
• Large workpiece drilling
• Production environments
• General workshop use

Benefits at a Glance

Digital Precision

The touchscreen provides real-time speed and depth information while giving the operator access to electronic control functions.

Broad Speed Range

The 60–3,600 RPM electronic speed range allows the machine to be adapted to different materials and drilling requirements.

Large Work Area

The 15" x 22" cast-iron table provides substantial support for large workpieces.

Repeatable Drilling

Five programmable memory settings and electronic depth control are useful for repetitive operations.

Improved Positioning

Crosshair lasers and integrated LED lighting make it easier to locate and monitor the drilling point.

Flexible Table Positioning

The table's ±90° tilt and 360° swivel capability provide considerable setup flexibility.

Industrial-Style Capability

The 20-inch swing, 6-inch quill travel, MT2 spindle, and heavy-duty construction make the DP:20 suitable for demanding shop environments.

Maintenance Recommendations

For dependable performance and accurate drilling:

• Keep the table and spindle area clean.
• Remove chips and dust from the machine after use.
• Inspect the drive belt periodically for wear.
• Keep the chuck and arbor surfaces clean.
• Check the chuck for proper operation and runout.
• Verify laser alignment periodically.
• Keep the touchscreen and controls clean and dry.
• Inspect the LED and laser systems for proper operation.
• Check table locking and adjustment mechanisms regularly.
• Follow Laguna Tools' recommended maintenance schedule.
• Disconnect electrical power before performing service or mechanical adjustments.

Product Specifications at a Glance

• Brand: Laguna Tools
• Model: DP:20
• Type: 20" floor-model drill press
• Motor: 1.5 HP PWM
• Voltage: 110–120V AC
• Speed: 60–3,600 RPM
• Rotation: Forward/Reverse
• Swing: 20"
• Spindle Taper: MT2
• Quill Travel: 6"
• Chuck Capacity: 5/64"–5/8" (2–16 mm)
• Table: 15" x 22" cast iron
• Table Tilt: ±90°
• Table Swivel: 360°
• T-Slots: 3
• Clamp Holes: 10
• Spindle-to-Table: 30" maximum
• Spindle-to-Base: 49.5" maximum
• Column Diameter: 3.15"
• Control: LCD touchscreen Smart Panel
• Memory Presets: 5
• Work Light: 5W LED
• Laser: Crosshair
• Net Weight: Approx. 304 lb.
• Gross Weight: Approx. 326 lb.
• Overall Height: Approx. 72.25"

Important Product Note

The Laguna Tools DP:20 should not be confused with the higher-powered DX:20. The DP:20 uses a 1.5 HP, 110–120V motor, while the DX:20 uses a 2.5 HP, 220V motor. Both share the 20-inch swing, 6-inch quill travel, touchscreen controls, and 15" x 22" table platform.

Laguna Tools identifies the DP:20 as a 20-inch drill press with a full-function digital touchscreen, and its current documentation lists the model as DP:20 1.5 HP 110–120V Drill Press.