Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Jet JPM 13CS 13in Closed Stand Planer Molder
- $737.00
- Brands JET
- Product Code: 708524
- Availability: In Stock
JET JPM-13CS 13-Inch Closed Stand Planer / Molder The JET JPM-13CS 13-Inch Closed Stand Planer / Molder is a versatile woodworking machine designed to handle both thickness planing and profile molding in one compact floor-standing unit. With a 1-1/2 HP single-phase motor and selectable 115/230 V operation, it is well suited to professional workshops, cabinet shops, furniture makers, and serious w..
13 Inch Closed Stand Planer Molder for Precision Woodworking
JET JPM-13CS 13-Inch Closed Stand Planer / Molder
The JET JPM-13CS 13-Inch Closed Stand Planer / Molder is a versatile woodworking machine designed to handle both thickness planing and profile molding in one compact floor-standing unit. With a 1-1/2 HP single-phase motor and selectable 115/230 V operation, it is well suited to professional workshops, cabinet shops, furniture makers, and serious woodworking environments.
Its 13-inch planing capacity provides ample room for dimensioning common boards, while the molding capability allows compatible profile knives to be used for producing decorative edges and custom wood profiles. A closed stand provides a stable base and gives the machine a dedicated floor-standing footprint.
Key Features
- 13-inch planing width — Handles a broad range of common woodworking stock.
- Planer and molder combination — Performs thicknessing and profile-molding operations on one machine.
- 1-1/2 HP motor — Provides dependable power for general planing and molding work.
- 115/230 V single-phase operation — Can be configured for compatible workshop electrical service.
- Two feed rates — Provides flexibility between stock removal and finish-oriented passes.
- Heavy-duty construction — Designed for regular workshop use.
- Closed steel stand — Provides stable floor-standing support and an integrated machine base.
- Large handwheel — Provides convenient control over cutterhead height.
- Cast-iron table — Provides a rigid surface for supporting workpieces.
- Molding capability — Allows the machine to produce custom profiles when equipped with appropriate molding knives.
- Dust collection port — Helps remove chips and dust when connected to a suitable collector.
- Compact combination design — Reduces the need for separate planing and molding machines.
Product Specifications
| Specification | Details |
|---|---|
| Brand | JET |
| Model | JPM-13CS |
| Machine Type | Planer / Molder |
| Maximum Planing Width | 13 in. |
| Motor Power | 1-1/2 HP |
| Voltage | 115/230 V |
| Phase | 1 Phase |
| Configuration | Floor Standing |
| Stand | Closed Stand |
| Feed System | Powered Feed |
| Feed Rates | Multiple selectable speeds |
| Table Construction | Heavy-Duty / Cast Iron |
| Cutterhead | Planer / Molder Cutterhead |
| Dust Collection | Integrated Dust Port |
| Primary Functions | Thickness Planing and Profile Molding |
| Applications | Dimensioning lumber, edge profiling, decorative molding and woodworking |
Specifications can vary by production configuration and revision. Confirm the current JET specification sheet for exact cutterhead speed, feed rates, maximum depth of cut, minimum/maximum stock thickness, dust-port size, dimensions, weight, and included molding accessories before purchase.
Planing and Molding in One Machine
The JPM-13CS is designed for shops that need more than a conventional thickness planer. Instead of using separate machines for dimensioning and profile work, this combination machine can perform both functions.
For planing, the machine removes material from the upper surface of rough lumber to bring boards to a consistent thickness. For molding, compatible knives can be installed to create shaped profiles along the workpiece.
This makes the JPM-13CS particularly useful when a project requires both accurate stock preparation and custom edge or surface profiles.
13-Inch Planing Capacity
With a maximum planing width of 13 inches, the JPM-13CS can accommodate a wide selection of boards used in furniture, cabinetmaking, millwork, and general woodworking.
The powered feed system moves the workpiece through the cutterhead at a controlled rate, helping maintain a consistent finished thickness along the board.
The machine is suitable for both initial dimensioning and lighter finishing passes, depending on the material and desired result.
Profile Molding Capability
The molding function expands the machine's usefulness beyond conventional thickness planing.
When equipped with the appropriate molding knives and setup, the machine can be used to produce profiles such as:
- Decorative edges
- Trim profiles
- Beveled edges
- Custom molding
- Architectural millwork components
- Repeated wood profiles
This capability can be especially valuable for furniture makers, cabinetmakers, and millwork shops producing custom components.
Important: Molding knives must be appropriate for the machine and application, correctly installed, and used according to JET's operating requirements.
1-1/2 HP Motor
The JPM-13CS uses a 1-1/2 HP single-phase motor and supports 115/230 V operation.
The dual-voltage configuration provides flexibility when integrating the planer/molder into different workshop electrical systems. The machine should be wired for the appropriate voltage by a qualified person in accordance with the manufacturer's instructions and applicable electrical requirements.
The motor provides the power needed for routine thicknessing and profile-molding applications within the machine's rated capacity.
Powered Feed System
A powered feed mechanism moves material through the machine at a controlled rate rather than relying on the operator to manually push the workpiece.
This provides several advantages:
- More consistent material feed
- Better control over finished thickness
- Repeatable production
- Reduced operator effort
- Improved workflow for multiple workpieces
Feed speed should be selected according to the material, cutter configuration, depth of cut, and desired surface finish.
Adjustable Cutterhead Height
A large handwheel allows the operator to adjust cutterhead height to establish the desired finished thickness.
This makes it easier to set the machine for different board dimensions and to make incremental adjustments during setup. For repeated production work, accurate height positioning also helps maintain consistency between workpieces.
Heavy-Duty Table and Closed Stand
The JPM-13CS uses a substantial work table designed to provide stable support as lumber passes through the cutterhead.
The closed stand gives the machine a dedicated floor-standing configuration rather than requiring a separate bench or support structure. It also provides an enclosed lower section that can help maintain a cleaner and more organized machine footprint.
The planer/molder should be positioned on a stable, level surface for proper operation.
Dust Collection
Planing and molding generate a significant quantity of chips and dust. The JPM-13CS includes a dust-collection connection for use with a suitable dust extractor.
Using an appropriately sized dust collector helps improve chip evacuation and keeps the area around the machine cleaner. Dust collection is particularly important when processing materials that produce fine airborne particles.
Typical Applications
The JET JPM-13CS is suitable for:
- Thickness planing
- Lumber dimensioning
- Profile molding
- Edge profiling
- Decorative trim production
- Cabinetmaking
- Furniture manufacturing
- Architectural millwork
- Custom woodworking
- Door and window components
- Small-batch production
- General professional woodworking
Why Choose the JET JPM-13CS?
The JET JPM-13CS 13-Inch Closed Stand Planer / Molder is a practical choice for shops that need both thickness-planing and profile-molding capability without dedicating floor space to two separate machines.
Its combination of a 13-inch working capacity, 1-1/2 HP motor, 115/230 V single-phase electrical configuration, powered feed, adjustable cutterhead, molding capability, and enclosed floor-standing design makes it a versatile addition to a professional woodworking shop.
For cabinetmakers, furniture manufacturers, millwork professionals, and custom woodworkers, the JPM-13CS offers a convenient way to move from rough stock preparation to finished profile production using a single machine.