Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Jet JDP 20MF Floor Drill Press 1.5 HP 1PH
- $778.00
- Brands JET
- Product Code: 354170
- Availability: In Stock
JET JDP-20MF Floor Drill Press 1-1/2 HP 1Ph 115/230 VThe JET JDP-20MF Floor Drill Press is a heavy-duty stationary drilling machine designed for workshops that require greater drilling capacity, precision, and control than a benchtop drill press can provide. With a 1-1/2 HP single-phase motor, 115/230 V operation, and a 20-inch swing, it provides ample working room for drilling larger workpieces.A..
Floor Drill Press Machine 1.5 HP for Precision Metalworking
JET JDP-20MF Floor Drill Press 1-1/2 HP 1Ph 115/230 V
The JET JDP-20MF Floor Drill Press is a heavy-duty stationary drilling machine designed for workshops that require greater drilling capacity, precision, and control than a benchtop drill press can provide. With a 1-1/2 HP single-phase motor, 115/230 V operation, and a 20-inch swing, it provides ample working room for drilling larger workpieces.
A 12-speed spindle system allows the operator to select an appropriate speed for different materials and drill-bit sizes. The machine also features a large worktable, rack-and-pinion table adjustment, Morse taper spindle, depth stop, and built-in work light, making it suitable for general metalworking, woodworking, fabrication, maintenance, and repair applications.
Key Features
20-inch swing — Provides substantial clearance between the spindle and column for larger workpieces.
1-1/2 HP motor — Supplies the power required for demanding drilling applications.
115/230 V single-phase operation — Provides electrical flexibility for different workshop installations.
12 spindle speeds — Allows the operator to select a suitable speed for different materials and tooling.
Morse Taper #3 spindle — Accepts compatible MT-3 tooling and accessories.
1-inch maximum drilling capacity — Provides substantial capacity for larger drilling operations.
Large cast-iron worktable — Offers a rigid and stable platform for supporting workpieces.
Table tilts up to 45° left and right — Allows angled drilling applications.
Rack-and-pinion table adjustment — Makes it easier to position the worktable vertically.
Rack-and-pinion head adjustment — Allows the head to be repositioned along the column when additional setup flexibility is needed.
Built-in work light — Improves visibility around the drilling area.
Depth stop — Helps produce repeatable hole depths.
Independent spindle and motor controls — Provides convenient access during operation.
Heavy-duty floor-standing design — Provides a stable platform for larger workpieces and demanding drilling tasks.
Product Specifications
| Specification | Details |
|---|---|
| Brand | JET |
| Model | JDP-20MF |
| Machine Type | Floor Drill Press |
| Swing | 20 in. |
| Maximum Drilling Capacity | 1 in. |
| Spindle Speeds | 12 |
| Spindle Speed Range | Approximately 150–4,200 RPM |
| Spindle Taper | MT-3 |
| Spindle Travel | Approximately 4 in. |
| Motor Power | 1-1/2 HP |
| Motor Type | Induction |
| Phase | 1 Phase |
| Voltage | 115/230 V |
| Prewired Voltage | 115 V |
| Worktable Type | Cast iron |
| Table Tilt | 45° left / 45° right |
| Table Adjustment | Rack and pinion |
| Spindle Quill Diameter | Approximately 2.36 in. |
| Column Diameter | Approximately 3-1/8 in. |
| Chuck Capacity | Approximately 5/8 in. |
| Work Light | Built in |
| Depth Stop | Yes |
| Machine Configuration | Floor standing |
| Application | Metalworking, woodworking, fabrication and general drilling |
Specifications are presented as a practical product reference. Electrical configurations, dimensions, and supplied accessories should be confirmed against the current JET documentation for the exact production version.
Powerful 1-1/2 HP Motor
The JDP-20MF is equipped with a 1-1/2 HP induction motor, giving it the power needed for larger drilling operations. Its 115/230 V single-phase electrical configuration provides flexibility for workshops with different power requirements.
The motor drives the multi-speed spindle through a belt-driven system, allowing the operator to select an appropriate spindle speed for the material and tooling being used.
12-Speed Spindle
With 12 available spindle speeds, the JDP-20MF offers considerably more speed-selection flexibility than basic drill presses.
Lower speeds are useful when working with larger drill bits or materials that require slower cutting speeds, while higher settings can be used with smaller tooling and applications where increased spindle speed is appropriate.
The wide speed range makes the machine versatile for both woodworking and metalworking applications.
20-Inch Swing for Larger Workpieces
The 20-inch swing gives the operator approximately 10 inches of clearance from the spindle centerline to the column. This provides significantly more working room than smaller drill presses.
The additional clearance is particularly useful when drilling holes in large plates, panels, frames, brackets, and other workpieces that cannot easily be positioned under a smaller machine.
MT-3 Spindle
The spindle uses a Morse Taper #3 (MT-3) configuration. This allows the drill press to accommodate compatible tooling and accessories designed for an MT-3 spindle.
The substantial spindle configuration is well suited to the machine's larger drilling capacity and makes it possible to use a variety of drilling accessories for different applications.
Adjustable Cast-Iron Worktable
The large worktable provides a stable surface for supporting workpieces during drilling. Its rack-and-pinion adjustment system allows the table to be raised or lowered smoothly along the column.
The table can also be tilted up to 45 degrees in either direction, allowing the operator to perform angled drilling operations without having to reposition the workpiece at an awkward angle.
Adjustable Drill Depth
A built-in depth stop allows the operator to control spindle travel and establish a repeatable drilling depth. This is especially useful when producing multiple holes that must have consistent dimensions.
For production-oriented drilling or repetitive workshop tasks, a controlled depth stop can reduce setup time and improve consistency from one workpiece to the next.
Built-In Work Light
The integrated work light illuminates the area around the drill bit and workpiece. Better visibility can make it easier to align the tooling with a marked hole location and monitor the cutting operation.
This feature is particularly useful when the drill press is installed in a workshop where general overhead lighting does not provide sufficient illumination directly around the spindle.
Heavy-Duty Floor-Standing Design
The JDP-20MF is built as a floor-standing drill press, providing a stable working platform without requiring a separate benchtop mounting arrangement.
Its larger footprint and rigid construction make it appropriate for permanent workshop installation. The floor-standing configuration also provides better clearance for larger workpieces than many compact benchtop models.
Suitable Applications
The JET JDP-20MF can be used for a broad range of drilling tasks, including:
Drilling metal plates and components
Drilling structural and fabrication parts
Woodworking and furniture projects
Cabinet and joinery work
Maintenance and repair
Fabrication shops
General workshop drilling
Repetitive hole drilling
Larger workpiece drilling
DIY and professional applications
Why Choose the JET JDP-20MF?
The JET JDP-20MF is designed for users who need more capacity and flexibility than a conventional benchtop drill press can provide. Its combination of a 20-inch swing, 1-1/2 HP motor, 12 spindle speeds, MT-3 spindle, 1-inch drilling capacity, adjustable cast-iron table, depth stop, and built-in work light makes it a versatile choice for demanding workshop applications.
For fabrication, maintenance, woodworking, and general metalworking, the JDP-20MF provides the capacity, speed control, and stable floor-standing construction needed for accurate and repeatable drilling.