Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Jet J7040 10 x 16 Horizontal Metal Bandsaw
- $3,012.00
- Brands JET
- Product Code: 414478
- Availability: In Stock
JET J-7040 10" x 16" Horizontal Bandsaw – 2 HP, 230V, 3 Phase Product Overview The JET J-7040 is a heavy-duty 10" x 16" horizontal metal-cutting bandsaw designed for professional fabrication shops, machine shops, maintenance departments, and industrial workshops. Its substantial cutting capacity makes it suitable for processing tubing, pipe, structural sections, bar stock, and other metal workpi..
10 x 16 Horizontal Bandsaw with 2 HP 230V Three Phase Motor
JET J-7040 10" x 16" Horizontal Bandsaw – 2 HP, 230V, 3 Phase
Product Overview
The JET J-7040 is a heavy-duty 10" x 16" horizontal metal-cutting bandsaw designed for professional fabrication shops, machine shops, maintenance departments, and industrial workshops. Its substantial cutting capacity makes it suitable for processing tubing, pipe, structural sections, bar stock, and other metal workpieces.
The machine combines a 2 HP, 230V, 3-phase motor with a variable-speed drive, allowing the operator to adjust blade speed from 100 to 350 SFPM. A six-point blade-guide system, rapid-action three-jaw vise, oil-bath transmission, coolant system, and adjustable material stop further support accurate and repeatable cutting.
Key Features
- 10" x 16" cutting capacity: Provides ample capacity for a wide range of metal stock.
- 2 HP three-phase motor: Delivers the power required for demanding metal-cutting applications.
- 230V electrical configuration: Designed for compatible three-phase industrial power.
- Variable-speed drive: Allows blade speed to be adjusted from 100–350 SFPM according to the cutting application.
- Six-point blade guides: Combine bearings and carbide guide surfaces to help maintain blade alignment.
- Rapid-action three-jaw vise: Speeds workpiece setup and provides secure clamping.
- 45° swiveling vise: Allows the machine to accommodate angled cutting operations.
- Heavy-duty oil-bath transmission: Uses hardened and ground gears for durable power transmission.
- 14" cast-iron blade wheels: Provide a rigid, durable wheel system.
- Recirculating coolant system: Helps cool and lubricate the blade during wet cutting.
- Adjustable material stop: Helps produce consistent lengths during repetitive cutting.
- Swing-away control panel: Keeps the main operating controls accessible while allowing convenient positioning.
- 1" bi-metal blade: Supplied for general-purpose metal-cutting applications.
Variable-Speed Cutting
The J-7040 uses a variable-speed drive system, giving the operator control over the blade's surface speed rather than limiting operation to a fixed setting.
The available range of 100 to 350 surface feet per minute (SFPM) allows the saw to be adjusted for different materials, workpiece sizes, and blade requirements. Selecting the appropriate speed helps balance cutting efficiency, blade life, heat generation, and finished cut quality.
10" x 16" Cutting Capacity
The J-7040 is designed for relatively large metal workpieces. Its published capacity includes 10" round stock at 90°, as well as rectangular sections up to 10" x 10" and 7" x 16" at 90°. At 45°, the listed rectangular capacity is 6-1/2" x 11".
This makes the machine useful for cutting structural components, tubing, bar stock, and other fabricated materials that exceed the capacity of smaller horizontal bandsaws.
Six-Point Blade Guide System
JET equips the J-7040 with an adjustable six-point blade guide assembly. The guide system uses cam-follower bearings and carbide guide surfaces to support the blade from multiple points.
The rear portion of the blade is supported by bearings mounted on a pivot shaft, helping distribute the load between the bearings. This arrangement is designed to keep the blade properly supported while cutting and help produce consistent results.
Heavy-Duty Transmission
The J-7040 features a heavy-duty transmission with hardened and ground gears operating in an oil bath. This design provides continuous lubrication for the gear train while helping the transmission withstand the loads associated with regular metal-cutting operations.
Secure Workholding and Repeat Cuts
A rapid-action three-jaw vise is designed to reduce setup time while holding the workpiece securely during cutting. The vise can swivel up to 45°, providing additional flexibility for angled cuts.
An adjustable material stop is also provided for repetitive work. Once the desired length is established, the stop can help position subsequent workpieces more consistently without measuring each piece from scratch.
Product Specifications
| Specification | Details |
|---|---|
| Brand | JET |
| Model | J-7040 |
| Stock Number | 414478 |
| Machine Type | Horizontal Bandsaw |
| Cutting Capacity | 10" x 16" |
| Round Capacity at 90° | 10" |
| Round Capacity at 45° | 10" |
| Rectangle Capacity at 90° | 10" x 10" and 7" x 16" |
| Rectangle Capacity at 45° | 6-1/2" x 11" |
| Vise Swivel | 45° |
| Blade Speed | 100–350 SFPM |
| Drive | Variable Speed |
| Blade Wheel Diameter | 14" |
| Blade Size | 1" x 0.035" x 135" |
| Motor Power | 2 HP |
| Motor Voltage | 230V |
| Motor Phase | 3 Phase |
| Bed Height | 23-1/2" |
| Overall Dimensions | 75-1/2" L x 33" W x 41" H |
| Approx. Net Weight | 927 lb |
| Blade Guides | Adjustable 6-point contact |
| Vise Type | Rapid-action 3-jaw |
| Transmission | Hardened/ground gears, oil bath |
| Blade Wheels | Cast iron |
| Coolant System | Recirculating |
| Material Stop | Adjustable |
| Standard Blade | 1" Bi-Metal |
These specifications are based on JET documentation and current product listings. One documentation source lists the blade as 1" x 0.035" x 135", while some retailer databases contain inconsistent blade-length entries; the 135" specification is therefore used here.
Typical Applications
The JET J-7040 is well suited for:
- Metal fabrication
- Structural steel preparation
- Tubing and pipe cutting
- Bar-stock cutting
- Frame fabrication
- Welding-shop preparation
- Machine-shop operations
- Maintenance and repair
- Production cutting
- General industrial metalworking
Designed for Professional Workshops
The J-7040 is built around features intended to improve both cutting control and shop productivity. The variable-speed drive allows the operator to fine-tune blade speed, while the hydraulic/counterbalanced feed system helps regulate blade engagement. The rapid-action vise reduces setup time, and the adjustable material stop makes repeated cuts easier to reproduce.
Its substantial 927-pound net weight and approximately 75-1/2" x 33" x 41" overall dimensions provide a stable platform for demanding cutting operations.
Why Choose the JET J-7040?
The JET J-7040 10" x 16" Horizontal Bandsaw is designed for shops that need a combination of large cutting capacity, adjustable blade speed, secure workholding, and industrial-duty construction.
Its 2 HP, 230V three-phase motor, 100–350 SFPM variable-speed drive, six-point blade guides, oil-bath transmission, rapid-action vise, recirculating coolant system, and adjustable material stop make it a strong choice for demanding fabrication and production environments.
For professional metalworking applications, the J-7040 provides a dependable platform for accurate, repeatable, and efficient cutting of a wide variety of metal stock.