Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
JET IDP‑22 22 In Industrial Drill Press
- $1,114.00
- Brands JET
- Product Code: 354301
- Availability: In Stock
JET IDP-22 22" Industrial Floor Model Drill PressProduct OverviewThe JET IDP-22 is a heavy-duty industrial floor-model drill press built for demanding drilling, tapping, and fabrication work. With a 22-inch swing, 1-1/2 HP motor, and 12 spindle speeds from 175 to 3,050 RPM, it provides the capacity and speed flexibility needed for a wide range of metalworking applications.Its substantial cast-iron..
Industrial 22 In Drill Press for Metal and Wood Workshops
JET IDP-22 22" Industrial Floor Model Drill Press
Product Overview
The JET IDP-22 is a heavy-duty industrial floor-model drill press built for demanding drilling, tapping, and fabrication work. With a 22-inch swing, 1-1/2 HP motor, and 12 spindle speeds from 175 to 3,050 RPM, it provides the capacity and speed flexibility needed for a wide range of metalworking applications.
Its substantial cast-iron table and base, large 3-5/8-inch steel column, ground work table, and ball-bearing-supported spindle are designed to provide stability and accurate operation. The machine is also equipped with a rotating, tilting worktable, adjustable depth stop, spindle safety guard, LED machine lamp, and 5/8-inch drill chuck.
Key Features
22-inch swing: Provides 11 inches of clearance from the column to the spindle center, allowing larger workpieces to be positioned under the spindle.
1-1/2 HP motor: The single-phase motor is rated for 115/230V and is prewired for 115V.
12 spindle speeds: The 175–3,050 RPM range gives operators flexibility when working with different drill sizes and materials.
Belt-drive system: Provides a straightforward, durable drive arrangement for industrial drilling applications.
MT-3 spindle taper: Provides compatibility with suitable tooling and accessories.
4-13/16-inch spindle travel: Provides substantial quill movement for deeper drilling operations.
1-1/4-inch cast-iron drilling capacity: Offers substantial drilling capability for heavy-duty applications.
1-inch mild-steel drilling capacity: Designed to handle larger drilling operations in mild steel.
1-inch mild-steel tapping capacity: Adds tapping capability for suitable applications.
Large cast-iron work table: The ground table measures 18-5/8" x 16-1/8" and supports up to 176 lb.
45° tilting table: The crank-operated table rotates and tilts up to 45° for angled drilling.
Quick-release table clamp: Helps speed up table adjustments.
Adjustable depth stop: A 1/2-inch external positive depth stop with a three-nut locking arrangement allows quick, repeatable depth settings.
Ball-bearing-supported spindle: Helps provide smooth spindle operation and maintain alignment.
LED machine lamp: Illuminates the work area for improved visibility.
Spindle safety guard: Provides additional protection around the rotating spindle.
Heavy-duty construction: Cast-iron table and base contribute to overall machine stability.
Drilling and Tapping Performance
The IDP-22 is designed for substantial metalworking tasks rather than light-duty bench drilling. Its rated capacity reaches 1-1/4 inches in cast iron and 1 inch in mild steel, while the machine also provides a 1-inch mild-steel tapping capacity.
The 12-speed belt-drive system covers 175 to 3,050 RPM, allowing the operator to select slower speeds for larger tooling and higher speeds for smaller drill bits and appropriate materials. The MT-3 spindle taper and 5/8-inch chuck further support a variety of drilling setups.
Adjustable Work Table
The IDP-22 uses a large 18-5/8" x 16-1/8" cast-iron work table with two 5/8-inch T-slots positioned on 3/4-inch centers. The table can rotate and tilt up to 45°, making it possible to set up angled drilling operations.
A quick-release clamp simplifies table adjustment, while the table's 176-pound load capacity provides substantial support for heavier workpieces and fixtures.
Product Specifications
| Specification | Details |
|---|---|
| Brand | JET |
| Model | IDP-22 |
| Stock Number | 354301 |
| Machine Type | 22" Industrial Floor Model Drill Press |
| Drive Type | Belt Drive |
| Motor Power | 1-1/2 HP |
| Motor Voltage | 115/230V |
| Factory Prewired | 115V |
| Phase | 1 Phase |
| Swing | 22" |
| Drilling Capacity – Cast Iron | 1-1/4" |
| Drilling Capacity – Mild Steel | 1" |
| Tapping Capacity – Mild Steel | 1" |
| Column-to-Spindle Distance | 10-7/8" |
| Number of Spindle Speeds | 12 |
| Spindle Speed Range | 175–3,050 RPM |
| Column Diameter | 3-5/8" |
| Spindle Taper | MT-3 |
| Spindle Travel | 4-13/16" |
| Spindle-to-Base Distance | 48-1/2" |
| Maximum Spindle-to-Table Distance | 28" |
| Table Size | 18-5/8" x 16-1/8" |
| Table Tilt | Up to 45° |
| T-Slots | 2 x 5/8" |
| T-Slot Centers | 3/4" |
| Work Table Capacity | 176 lb |
| Base Dimensions | 22-5/8" x 19-7/16" x 3-3/8" |
| Base Work Table | 21-1/2" x 18-5/16" |
| Base Slots | 2 x 5/8" |
| Chuck Size | 5/8" |
| Overall Dimensions (L x W x H) | 35" x 19" x 67" |
| Machine Weight | 364 lb |
The specifications above are consolidated from JET specification documentation and supporting product listings.
Standard Equipment
The JET IDP-22 is supplied with several features intended to make the machine ready for industrial workshop use:
LED machine lamp
Ground work table
Spindle safety guard
Drill chuck and key
Typical Applications
The IDP-22 is suitable for applications such as:
Heavy-duty metalworking
Fabrication and manufacturing
Maintenance and repair
Production drilling
Drilling large-diameter holes
Mild-steel tapping
Angled drilling
General industrial workshop operations
Why Choose the JET IDP-22?
The JET IDP-22 is designed for users who need considerably more capacity than a conventional benchtop or light-duty floor drill press can provide. Its 22-inch swing, 1-1/2 HP motor, 1-1/4-inch cast-iron drilling capacity, 12-speed belt drive, and large tilting cast-iron table make it well suited to demanding shop environments.
With a rigid floor-standing design, substantial workholding capacity, MT-3 spindle taper, adjustable depth stop, and integrated work light and spindle guard, the IDP-22 provides a strong combination of drilling capacity, stability, speed flexibility, and industrial functionality.