Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
ICS 2820W Electric Corded Core Drill for Concrete
- $1,853.00
- Brands ICS
- Product Code: VORTEX-625-120V
- Availability: In Stock
ICS 2820 Watt Electric Corded Core DrillProduct OverviewThe ICS Vortex-625-120V 2820 Watt Electric Corded Core Drill is a heavy-duty, stand-mounted core drill motor built for large-diameter concrete drilling. With a rated power output of 2,820 watts, six selectable gears, and a drilling capacity of up to 24 inches, it is designed for demanding professional applications where high power and control..
Key Features of the ICS 2820W Electric Corded Core Drill
ICS 2820 Watt Electric Corded Core Drill
Product Overview
The ICS Vortex-625-120V 2820 Watt Electric Corded Core Drill is a heavy-duty, stand-mounted core drill motor built for large-diameter concrete drilling. With a rated power output of 2,820 watts, six selectable gears, and a drilling capacity of up to 24 inches, it is designed for demanding professional applications where high power and controlled drilling are essential.
The Vortex-625-120V operates from standard 115–120V single-phase power and uses wet cutting to handle large core-drilling jobs. Its 1.25-inch UNC spindle connection accommodates compatible core bits, while its six-speed gearbox allows the operator to select a suitable rotational speed for different bit diameters.
Key Features
2,820W rated input power provides strong performance for demanding core drilling.
3,350W maximum input power gives the motor additional capacity under heavy loads.
Six-speed gearbox offers a wide range of operating speeds for different core sizes.
1–24 inch drilling capacity makes the drill suitable for both smaller penetrations and very large openings.
Wet-cutting design supports controlled drilling of concrete and other suitable masonry materials.
Air-cooled motor provides cooling without requiring a separate motor-water cooling system.
1.25-inch UNC core bit connection provides a standard connection for compatible core-drilling equipment.
Stand-mounted configuration provides a stable setup for large-diameter drilling.
Standard 115–120V operation allows the motor to run from common jobsite or household electrical power, subject to the required circuit capacity.
Six-Speed Gearbox
Large core bits require different rotational speeds than smaller bits. The Vortex-625-120V addresses this with a six-speed gearbox, giving the operator a broad range of speed selections.
No-Load Speeds
210 RPM
340 RPM
480 RPM
730 RPM
1,200 RPM
1,670 RPM
Loaded Speeds
135 RPM
220 RPM
315 RPM
480 RPM
780 RPM
1,100 RPM
The multiple gear ratios allow the motor to be matched more appropriately to the core diameter and drilling conditions.
Large-Diameter Drilling Capability
The Vortex-625-120V is designed for core holes from 1 to 24 inches (2.5–60 cm). This broad range makes it particularly useful for applications requiring substantial concrete penetrations rather than only small anchor or utility holes.
Typical applications include:
HVAC installations
Plumbing and pipe penetrations
Electrical and utility openings
Network and communications installations
Anchor holes
Chimney installations
Guardrail installation
Fence installation
Large construction penetrations
General concrete coring
ICS specifically describes the Vortex-625-120V as an ultra-heavy-duty core drill motor for very large drilling applications.
Wet-Cutting Operation
The Vortex-625-120V is designed for wet cutting. Using water during diamond core drilling can help manage heat and drilling debris while supporting efficient cutting of suitable concrete and masonry materials.
Because this model is intended for wet drilling, operators should use appropriate water-management procedures and follow the manufacturer's safety requirements when working around electrical equipment.
Product Specifications
| Specification | Details |
|---|---|
| Brand | ICS |
| Model | Vortex-625-120V |
| Product Type | Electric Corded Core Drill Motor |
| Configuration | On-Stand / Rig Mounted |
| Drilling Diameter | 1–24 in. / 2.5–60 cm |
| Motor Type | Electric, single-phase |
| Voltage | 115–120V |
| Frequency | 50–60 Hz |
| Rated Input Power | 2,820W |
| Maximum Input Power | 3,350W |
| Rated Input Current | 25A |
| Maximum Input Current | 31A |
| Number of Gears | 6 |
| Rated No-Load Speed | 210 / 340 / 480 / 730 / 1,200 / 1,670 RPM |
| Rated Load Speed | 135 / 220 / 315 / 480 / 780 / 1,100 RPM |
| Core Bit Connection | 1.25 in. UNC |
| Cutting Method | Wet |
| Dry Cutting | No |
| Cooling System | Air cooled |
| Micro-Percussion Technology | No |
| Weight | 31.4 lb. / 14.2 kg |
| Dimensions (L × W × H) | 21.25 × 6.25 × 6.75 in. / 55 × 17 × 19 cm |
| Sound Pressure Level | 91 dB(A) |
| Sound Power Level | 104 dB(A) |
| Hand-Held Operation | No |
| Compatible Stands | C-520-ICS, X2R-ICS |
| Country of Origin | Italy |
Specifications are based primarily on the current ICS product information.
Compatible Stands
The Vortex-625-120V is designed for use with compatible ICS drill stands, including the C-520-ICS and X2R-ICS. The drill motor and stand are separate products, so buyers should verify the package contents before ordering.
What Makes the Vortex-625-120V a Professional Choice?
The Vortex-625-120V is built around one primary objective: large, demanding core drilling. Its combination of 2,820W rated power, six gears, 1–24-inch drilling capacity, wet-cutting capability, and stand-mounted operation gives contractors the flexibility needed for substantial concrete penetrations.
For jobs involving HVAC, utilities, plumbing, anchors, chimneys, guardrails, fencing, and other large openings, this ICS core drill provides a powerful and versatile drilling platform.
Important Buying Note
The Vortex-625-120V is the drill motor only. A compatible drill stand and suitable core bit are required for operation and are not necessarily included with the motor. Confirm the exact package contents and stand compatibility before purchase.