Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Magswitch Sheet Handler Magnetic Steel Handling Tool
- $580.00
- Brands Magswitch
- Product Code: 8100361
- Availability: In Stock
Magswitch Sheet Handler – 8100361 The Magswitch Sheet Handler is a heavy-duty magnetic alignment and handling tool designed to make positioning, leveling, and moving large steel sheets easier. It is particularly useful in shipbuilding, steel fabrication, welding, and heavy plate assembly, where large sheets often need to be aligned accurately before welding. Instead of relying on wedges, dogs, o..
Features of the Magswitch Sheet Handler Magnetic Handling Tool
Magswitch Sheet Handler – 8100361
The Magswitch Sheet Handler is a heavy-duty magnetic alignment and handling tool designed to make positioning, leveling, and moving large steel sheets easier. It is particularly useful in shipbuilding, steel fabrication, welding, and heavy plate assembly, where large sheets often need to be aligned accurately before welding.
Instead of relying on wedges, dogs, or manual force alone, the Sheet Handler uses a mechanically activated Magswitch magnetic system to grip ferrous steel. Once attached, the long handle and pivoting design provide leverage for bringing misaligned sheets together or moving a plate into position. Magswitch rates the tool at a 1,470 lb maximum breakaway force on 3/4-inch steel under its specified test conditions.
Key Features
- 1,470 lb maximum breakaway force: Provides a strong magnetic grip on suitable steel surfaces.
- Mechanical magnetic activation: The magnetic field is switched fully on or off using the handle mechanism.
- No electrical power required: Operates mechanically without batteries, cords, or external power.
- Sheet alignment capability: Helps bring steel plates together and correct high or low points along a seam.
- Pivoting design: Allows the tool to be used for lifting, positioning, or moving sheet material.
- Extendable handle: Provides additional leverage and reach, particularly when working on fabrication tables.
- Wheel-assisted movement: The sheet can be pivoted or lifted onto a wheel to help drag or reposition it.
- Works on flat and round steel: Designed to hold to suitable flat and curved ferrous surfaces.
- Cleanable magnetic system: The magnets are designed to stay relatively free of debris during use.
- Heavy-duty construction: Built for demanding steel fabrication and shipbuilding environments.
Designed for Steel Sheet Alignment
Large steel plates can be difficult to position precisely by hand. The Magswitch Sheet Handler provides a dedicated contact point that lets the operator apply controlled leverage to the sheet.
For plate alignment, the tool can be positioned over a seam and activated. The operator can then use the handle and pivot point to bring the sheets into better alignment before tack welding. Magswitch specifically describes the tool as a solution for removing high and low points during plate alignment.
Powerful Magnetic Grip
The Sheet Handler has a maximum breakaway rating of 1,470 lbs (666.7 kg) on 3/4-inch steel. Magswitch specifies a full saturation thickness of 3/8 inch (10 mm). Actual holding performance can vary depending on steel thickness, surface condition, material composition, air gaps, and the direction of applied force.
The breakaway figure should therefore not be treated as a universal safe working load. Operators should follow the manufacturer's instructions and evaluate the actual application before relying on the magnetic grip.
Mechanical On/Off Operation
A major advantage of this Sheet Handler is that its magnetic field can be switched completely on and off mechanically. This eliminates the need for an electrical power source and makes the tool convenient for fabrication environments where cables or batteries would be inconvenient.
The magnetic mechanism is also designed to remain protected from common steel debris, helping maintain practical operation in fabrication areas.
Extended Handle and Pivot Action
The long handle provides leverage when aligning large plates. It can also be extended for use on fabrication tables, allowing the operator to work with greater reach.
For moving a sheet, the tool can be used to pivot or lift the material onto its wheel, making it easier to drag or reposition the steel rather than attempting to move the entire plate manually.
Ideal Applications
The Magswitch Sheet Handler is well suited for:
- Shipbuilding
- Steel plate fabrication
- Structural steel fabrication
- Welding and fabrication shops
- Large steel sheet alignment
- Plate seam alignment
- Steel plate leveling
- Sheet positioning
- Heavy steel handling
- Pre-weld fit-up
- Construction and industrial fabrication
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Magswitch Sheet Handler |
| Part Number | 8100361 |
| Product Type | Magnetic Sheet Alignment & Handling Tool |
| Maximum Breakaway | 1,470 lbs / 666.7 kg |
| Breakaway Test Thickness | 3/4 in. steel |
| Full Saturation Thickness | 3/8 in. / 10 mm |
| Product Weight | 21.2 lbs / 9.6 kg |
| Dimensions | 24.5 × 9.3 × 54.4 in. |
| Metric Dimensions | 622.3 × 236.2 × 1,381.7 mm |
| Magnetic Pole Footprint | 166 × 71.1 mm |
| Power Requirement | None |
| Magnetic Activation | Mechanical on/off |
| Compatible Material | Ferrous steel |
| Handle | Extendable |
| Wheel-Assisted Movement | Yes |
| Primary Application | Sheet alignment and leveling |
Specifications are based on Magswitch's current product information for 8100361.
Important Load Consideration
The 1,470 lb maximum breakaway figure is a laboratory rating, not a blanket lifting capacity. Magswitch's specification is based on a particular steel thickness and test condition. Real-world magnetic holding force can change significantly with plate thickness, surface cleanliness, paint or coatings, air gaps, steel grade, and the direction of loading.
For safe operation, use the Sheet Handler only on suitable ferrous material and follow Magswitch's operating and safety instructions. Do not assume the maximum breakaway value represents the permissible load for every application.
Why Choose the Magswitch Sheet Handler?
The Magswitch Sheet Handler 8100361 provides fabricators with a practical way to align and manipulate large steel sheets without depending entirely on manual force or temporary wedges. Its combination of strong mechanical magnetic grip, long extendable handle, pivoting action, and wheel-assisted movement makes it particularly useful during heavy plate fit-up.
For shipyards, structural steel shops, and industrial fabrication operations, it is a specialized tool for faster sheet alignment, leveling, positioning, and controlled movement of large steel plates.