Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Maksiwa Sliding Panel Saw 7.5HP 220V 3 Phase Titanium
- $4,735.00
- Brands Maksiwa International
- Product Code: BMP.3200.IR PLATINUM
- Availability: In Stock
Maksiwa International 220V 3-Phase 7.5HP Titanium Sliding Panel Saw The Maksiwa International 7.5HP Titanium Sliding Panel Saw is a professional-grade panel saw designed for high-volume woodworking, cabinetmaking, furniture production, and sheet-material processing. The machine combines a powerful 7.5 HP three-phase main motor, a dedicated 3/4 HP scoring motor, a long 126-inch sliding table, and ..
Features of Maksiwa Sliding Panel Saw 7.5HP Titanium
Maksiwa International 220V 3-Phase 7.5HP Titanium Sliding Panel Saw
The Maksiwa International 7.5HP Titanium Sliding Panel Saw is a professional-grade panel saw designed for high-volume woodworking, cabinetmaking, furniture production, and sheet-material processing. The machine combines a powerful 7.5 HP three-phase main motor, a dedicated 3/4 HP scoring motor, a long 126-inch sliding table, and digital measurement features for accurate, repeatable cuts.
The model associated with this configuration is BMP.3200.IR. Maksiwa's current product page identifies it as the 10' Platinum Sliding Panel Saw, while some retail listings use the "Titanium" name in the product title. For specification accuracy, the model number is the best identifier.
Key Features
- 7.5 HP three-phase main motor provides strong cutting performance for professional woodworking.
- 3/4 HP scoring motor helps produce cleaner cuts in laminated and finished sheet materials.
- 126" sliding table provides extensive support for large panels.
- Digital rip-fence readout with micro-adjustment allows fine positioning.
- Digital angle display makes blade-angle setup easier from 90° to 45°.
- 51" maximum rip capacity supports large sheet-material cuts.
- Up to 126" crosscut capacity accommodates long panels.
- Eye-level control panel keeps primary controls conveniently positioned.
- 12" main blade capacity, with the current specifications also listing compatibility with a 14" blade.
- Scoring blade system helps reduce chipping on laminated, veneered, and coated panels.
- Ball-bearing sliding-table mechanism provides smooth table movement.
- Dual blade covers and swing-away overhead guard add protection during operation.
- Dust collection ports help connect the saw to a suitable shop dust-collection system.
- Blade set included for a ready-to-use configuration.
Powerful 7.5 HP Drive System
The main saw is powered by a 7.5 HP, 3-phase motor rated at 4,000 RPM. This high-output motor is designed for demanding panel-processing applications and provides the power needed to cut large wood-based sheets efficiently.
The machine also has a dedicated 3/4 HP scoring motor operating at 8,000 RPM, allowing the scoring blade to make a preliminary cut before the primary blade completes the operation.
Long Sliding Table
The 126" × 14" sliding table is designed to make handling large panels easier. Its long travel allows substantial sheet goods to be supported and guided through the cutting process.
The current Maksiwa specifications identify the table mechanism as using ball bearings, helping provide smooth movement during repeated production cuts.
Digital Rip Fence with Micro-Adjustment
The European-style 51" rip fence features a digital readout and micro-adjustment system. This allows the operator to make fine positional corrections after locking the fence into place.
The combination is particularly useful when producing multiple components that need consistent dimensions.
Tilting Blade and Digital Angle Display
The saw is equipped with a tilting main blade system and a digital angle display covering 90° to 45°. This makes it possible to perform both standard square cuts and angled bevel cuts.
The maximum cutting height is 3-1/2 inches at 90° and 2-7/16 inches at 45°.
Scoring Blade System
The dedicated scoring assembly is designed to make a shallow preliminary cut before the main blade passes through the material. This is especially helpful when working with finished surfaces that can be prone to chipping or breakout.
The scoring system uses a 4-3/4" (120 mm) conical scoring blade driven by the 3/4 HP scoring motor.
Built for Large Sheet Materials
With a maximum crosscut capacity of 126 inches (3,200 mm) and a maximum rip capacity of 51 inches (1,300 mm), the saw is designed for processing large panels used in cabinetry, furniture, and architectural woodworking.
Typical materials include:
- Plywood
- MDF
- Melamine
- Particleboard
- Laminated panels
- Veneered sheets
- Wood-based composite panels
Blade selection should be matched to the specific material and desired finish.
Professional Safety and Handling Features
Maksiwa equips the machine with several features intended to improve operation and material control, including an eye-level control panel, swing-away overhead guard, flip stops, wedge clamp, sheet clamp, and push handle. The crosscut fence also provides a 45° miter function and telescoping capability.
Dust Collection
The saw has two 4-inch dust ports and requires a minimum dust-collection capacity of approximately 1,000 CFM according to Maksiwa's listed specifications. A properly sized dust collector should be used to help control airborne sawdust and maintain a cleaner work area.
Specifications
| Specification | Details |
|---|---|
| Brand | Maksiwa International |
| Model | BMP.3200.IR |
| Series | Platinum / Titanium listing configuration |
| Product Type | Sliding Panel Saw |
| Main Motor | 7.5 HP |
| Main Motor Speed | 4,000 RPM |
| Main Motor Power | 5.5 kW |
| Electrical Requirement | 220V, 3-Phase, 30A, 60 Hz |
| Scoring Motor | 3/4 HP |
| Scoring Motor Speed | 8,000 RPM |
| Maximum Main Blade Diameter | 14" / 355 mm |
| Standard Main Blade | 12" / 305 mm |
| Main Blade Arbor | 1-3/16" / 30 mm |
| Maximum Cutting Height at 90° | 3-1/2" / 90 mm |
| Cutting Height at 45° | 2-7/16" / 63 mm |
| Scoring Blade Diameter | 4-3/4" / 120 mm |
| Scoring Blade Arbor | 25/32" / 20 mm |
| Scoring Blade Type | Conical |
| Maximum Rip Capacity | 51" / 1,300 mm |
| Maximum Crosscut Capacity | 126" / 3,200 mm |
| Crosscut Fence Capacity | 78" closed / 120" open |
| Sliding Table Dimensions | 126" × 14" |
| Sliding Table Mechanism | Ball bearings |
| Machine Dimensions | 132" × 137" × 75" |
| Cast-Iron Table | 35" × 21" × 34" |
| Dust Ports | 2 × 4" |
| Minimum Dust Collection | 1,000 CFM |
| Machine Weight | Approximately 1,250 lbs. |
| Warranty | 2 years |
Specifications are based primarily on Maksiwa's current BMP.3200.IR product information.
What's Included
The package includes:
- 1 × Maksiwa BMP.3200.IR Sliding Panel Saw
- Main saw blade
- Scoring blade
- Sliding-table assembly
- Rip fence with digital readout
- Crosscut fence
- Overhead guard
- Flip stops
- Wedge clamp
- Sheet clamp
Maksiwa and retailer listings identify a set of blades as included, although exact blade specifications can vary by package configuration.
Ideal Applications
This sliding panel saw is well suited for:
- Cabinet manufacturing
- Furniture production
- Architectural millwork
- Commercial woodworking
- Custom cabinetry
- Professional panel processing
- High-volume sheet cutting
- Workshop production environments
Important Electrical Consideration
This machine requires 220V three-phase power at 30 amps and 60 Hz. It is not a standard single-phase household machine, so the workshop should have an appropriate three-phase electrical supply before installation.
Why Choose the Maksiwa 7.5HP Sliding Panel Saw?
The Maksiwa BMP.3200.IR is designed for shops that need a combination of power, cutting capacity, measurement accuracy, and efficient panel handling. Its 7.5 HP main motor, dedicated scoring system, long sliding table, digital rip-fence readout, tilting blade, and large crosscut capacity make it a capable solution for professional woodworking operations.
For cabinetmakers and furniture manufacturers processing large sheet goods on a regular basis, this machine provides the stability and production-oriented features needed for accurate, repeatable panel cutting.