Features and Benefits of Laguna Tools F2 Fusion Tablesaw 36in

Laguna Tools F2 Fusion Tablesaw 36"

Product Overview

The Laguna Tools F2 Fusion Tablesaw 36" is a compact professional table saw designed for woodworkers who want cabinet-saw features without the footprint of a large industrial machine. The F2 combines a 1-3/4 HP TEFC induction motor, precision-ground cast-iron table and wings, a European-style Hi/Low fence, integrated dust collection, and a built-in mobility system.

The 36-inch version provides substantial capacity for cabinetmaking, furniture construction, hardwood ripping, plywood cutting, and general shop work. Its 10-inch blade, 36-inch rip capacity, 45-degree left tilt, and 3-1/8-inch maximum cutting depth make it versatile enough for a wide range of woodworking tasks.

Key Features

• 1-3/4 HP TEFC capacitor-start induction motor
• 115V single-phase standard configuration
• Optional 230V conversion capability
• 36-inch rip capacity
• 10-inch blade capacity
• 5/8-inch arbor
• 4,500 RPM arbor speed
• 45° left blade tilt
• 3-1/8-inch maximum cut at 90°
• 2-1/8-inch maximum cut at 45°
• Precision-ground cast-iron table
• Precision cast-iron extension wings
• European-style Hi/Low aluminum fence
• Integrated high/low dust collection
• 4-inch main dust port
• 1-1/2-inch blade-guard dust port
• Cast-alloy trunnions
• Cabinet-mounted arbor
• Magnetic switch
• Built-in mobility system
• Integrated tool and accessory storage
• Digital blade-tilt readout on current configuration
• Quick-release blade guard and spreader
• Riving knife included

Product Specifications

Specifications are based primarily on Laguna Tools' F2 documentation and current product information. Some older F2 documentation lists slightly different overall dimensions, weight, and certain accessory specifications, so the exact SKU should be checked for a particular unit.

1-3/4 HP Motor

The F2 uses a 1-3/4 HP TEFC capacitor-start AC induction motor running at approximately 3,450 RPM. The standard machine is wired for 115V single-phase operation, with a 230V configuration available through the appropriate electrical components.

The motor is paired with a single V-ribbed Bando belt drive, providing power transfer from the motor to the saw arbor.

For installation, use a properly grounded circuit that meets the electrical requirements of the exact machine configuration.

36-Inch Rip Capacity

The F2's 36-inch rip capacity provides ample room for cutting wide boards and sheet goods.

This makes the saw useful for:

• Cabinet panels
• Plywood
• Hardwood boards
• Furniture components
• Shelving
• Trim and molding stock
• General sheet-goods processing

The fence provides 17 inches of capacity to the left of the blade as well.

Precision Cast-Iron Table

The F2 features a precision-ground cast-iron main table with precision cast-iron extension wings. The current specifications list the table system at approximately 44 inches wide by 27 inches deep.

The rigid cast-iron surface provides a stable reference for workpieces while helping minimize vibration during cutting.

European Hi/Low Fence

The F2 incorporates a Camlock T-shaped fence with a European-style Hi/Low aluminum face.

This design allows the fence face to be configured for different cutting operations and provides a useful combination of European-style and conventional fence characteristics. Laguna lists a fence face approximately 33-7/16 inches long.

The included fence and rails provide the machine's standard 36-inch rip capacity.

10-Inch Blade

The F2 accepts a 10-inch maximum-diameter blade on a 5/8-inch arbor, with the arbor operating at approximately 4,500 RPM.

The machine is supplied with a carbide-tipped blade. Current Laguna documentation identifies a 10-inch blade as included, while specific documentation versions list different tooth counts, so buyers should verify the included blade configuration for the particular production revision.

Cutting Capacity and Blade Tilt

The F2 provides:

• 3-1/8" maximum depth of cut at 90°
• 2-1/8" maximum depth of cut at 45°
• 45° maximum left blade tilt

This allows the saw to perform standard ripping and crosscutting as well as bevel cuts for furniture, cabinetry, and other woodworking projects.

Digital Blade-Tilt Readout

Current F2 configurations include a digital readout for blade tilt, allowing the operator to monitor the blade angle more precisely during setup. Laguna identifies the DRO as standard equipment on the current F2 and F3 Fusion saws.

This is particularly useful when repeatable bevel angles are important.

Integrated Dust Collection

The Fusion F2 uses a high/low dust-collection arrangement designed to capture sawdust from both beneath the table and around the blade.

The main dust outlet is 4 inches, while the blade guard provides a separate 1-1/2-inch dust port. Laguna specifies approximately 500 CFM minimum dust-collection capacity for the F2.

Using an appropriately sized dust collector helps maintain a cleaner cutting environment and reduce airborne wood dust.

Cast-Alloy Trunnions and Cabinet-Mounted Arbor

The F2 uses cast-alloy trunnions and a cabinet-mounted arbor.

This construction provides a rigid mounting arrangement for the blade assembly while keeping the major operating components protected inside the cabinet.

The arbor bearings are sealed and permanently lubricated, reducing routine lubrication requirements.

Built-In Mobility

A mobility system is integrated into the F2 cabinet, allowing the saw to be moved when necessary without requiring a separate aftermarket mobile base.

This is useful for workshops where the machine needs to be repositioned for different projects or stored when not in use.

Integrated Tool Storage

The F2 incorporates on-board tool and accessory storage for keeping frequently used equipment organized.

The included equipment includes a miter gauge, push stick, blade-changing tools, and other accessories, depending on the specific production package.

Safety Features

The F2 includes several components designed to support safer operation:

• Magnetic power switch
• Riving knife
• Quick-release blade guard
• Spreader
• Push stick
• Zero-clearance throat plate
• Tool storage for accessories

The supplied blade guard and riving knife should be used whenever the cutting operation permits, following Laguna Tools' operating instructions.

Typical Applications

The Laguna Tools F2 Fusion 36" is well suited for:

• Cabinetmaking
• Furniture construction
• Hardwood ripping
• Plywood cutting
• Sheet-goods processing
• Trim work
• Joinery preparation
• Custom woodworking
• Professional hobby shops
• Small production environments

Benefits at a Glance

36-Inch Rip Capacity

Provides useful capacity for wide boards and sheet goods without the footprint of a large 52-inch industrial saw.

Professional Construction

Cast-iron table and wings, cast-alloy trunnions, and a cabinet-mounted arbor provide a stable cutting platform.

Compact Shop Footprint

The F2 offers professional-oriented features while occupying less space than many larger cabinet saws.

Flexible Fence

The European Hi/Low aluminum fence face accommodates different workpiece and cutting requirements.

Integrated Mobility

The built-in mobility system makes repositioning the machine considerably easier.

Effective Dust Management

The high/low dust-collection system and dual dust ports help control sawdust during operation.

Maintenance Recommendations

For reliable performance and accurate cutting:

• Keep the cast-iron table clean and protected from corrosion.
• Inspect the saw blade before each use.
• Keep the blade and fence properly aligned.
• Check the riving knife and guard before operation.
• Keep the dust ports and cabinet interior clear of excessive sawdust.
• Inspect the V-ribbed belt for wear.
• Check the blade arbor and mounting surfaces for debris.
• Verify smooth operation of the blade-height and tilt mechanisms.
• Keep the fence rails clean.
• Check the magnetic switch and electrical components periodically.
• Disconnect the saw from power before performing maintenance or changing blades.

Product Specifications at a Glance

• Brand: Laguna Tools
• Model: F2 Fusion Tablesaw
• Configuration: 36"
• SKU: MTSF236110175-0130
• Motor: 1-3/4 HP TEFC induction
• Voltage: 115V standard / 230V option
• Phase: Single phase
• Motor Speed: 3,450 RPM
• Full-Load Current: 14 A / 7 A
• Blade: 10"
• Arbor: 5/8"
• Arbor Speed: 4,500 RPM
• Rip Capacity: 36" right / 17" left
• Maximum Dado Diameter: 8"
• Maximum Dado Width: 13/16"
• Cut Depth at 90°: 3-1/8"
• Cut Depth at 45°: 2-1/8"
• Blade Tilt: 45° left
• Table: Precision-ground cast iron
• Fence: European Hi/Low aluminum
• Main Dust Port: 4"
• Blade Guard Port: 1-1/2"
• Minimum Dust Collection: 500 CFM
• Floor-to-Table Height: Approx. 35"
• Net Weight: Approx. 276 lb.
• Shipping Weight: Approx. 359 lb.
• Mobility: Built into cabinet
• Blade Guard: Included
• Riving Knife: Included
• Miter Gauge: Included

Important Product Note

The Laguna Tools F2 Fusion 36" is the standard 36-inch-rip configuration. Laguna's current documentation identifies the standard stock model as MTSF236110175-0130. A separate 52-inch configuration has also been offered, so the SKU should be checked carefully when creating an ecommerce listing.

The F2 is specified as a 1-3/4 HP, 115V single-phase saw as supplied, with a 230V option requiring the appropriate switch, plug, and cord components rather than assuming a factory-wired 230V configuration.