Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
IMER Combicut 350i 14 In 220V 4HP Tile Stone Porcelain Saw
- $1,557.00
- Brands IMER
- Product Code: 1188931
- Availability: In Stock
IMER Combicut 350 iPower 14-Inch 220V 4 HP Tile, Stone & Porcelain Saw Product Overview The IMER Combicut 350 iPower is a professional overhead-rail saw designed for demanding tile, stone, porcelain, and masonry cutting applications. Powered by a 4 HP, 220V single-phase high-torque motor, it combines substantial cutting power with a guided travel system for accurate, lengthy cuts. The machin..
Features and Benefits of IMER Combicut 350i 14 Inch Power Saw
IMER Combicut 350 iPower 14-Inch 220V 4 HP Tile, Stone & Porcelain Saw
Product Overview
The IMER Combicut 350 iPower is a professional overhead-rail saw designed for demanding tile, stone, porcelain, and masonry cutting applications. Powered by a 4 HP, 220V single-phase high-torque motor, it combines substantial cutting power with a guided travel system for accurate, lengthy cuts. The machine is identified by model number 1188931 and uses a 14-inch blade with a 1-inch arbor.
Its overhead beam can be tilted for 45-degree bevel cuts, while the stainless-steel cutting surface, integrated stand, wheel kit, and water-management system make the saw well suited to professional tile installers, masons, stone fabricators, landscapers, and general contractors.
Key Features
- 4 HP, 220V high-torque motor provides power for demanding cutting applications.
- 14-inch blade capacity accommodates large-format cutting tasks.
- 1-inch blade shaft for compatible 14-inch diamond blades.
- Up to 41.5-inch straight cutting length, extending to 47.25 inches with plunge cutting.
- Maximum cutting depth of approximately 4.75 inches.
- Overhead travel beam with a nylon roller-bearing system for smooth, controlled movement.
- Beam tilts for accurate 45-degree bevel cuts.
- Stainless-steel cutting surface provides a durable work area.
- 9-gallon removable water pan helps simplify cleanup.
- Integrated stand with wheel kit makes setup and repositioning easier.
- 180-degree protractor included for angled cuts.
- 14-inch general-purpose blade included.
- High-flow water pump included for wet cutting.
Powerful 4 HP Motor
The Combicut 350 iPower uses a 4 HP, 220V, 15-amp single-phase motor designed to deliver high torque when cutting dense materials. The motor transfers power to the blade through a serpentine belt system, providing a robust drive arrangement for professional use. The blade is rated at 2,800 RPM.
This power level makes the saw appropriate for applications involving tile, porcelain, stone, brick, pavers, and other compatible masonry materials.
Long, Accurate Cutting Capacity
The overhead travel system is designed to provide controlled movement along the cutting beam. IMER uses a nylon roller-bearing system to support smooth travel and precise blade positioning.
The saw provides a maximum cutting length of:
- 41.5 inches for standard cutting
- 47.25 inches with plunge cutting
This extended capacity makes the Combicut 350 iPower particularly useful for large-format tile, slabs, stone pieces, and lengthy masonry cuts.
45-Degree Bevel Cutting
For angled work, the travel beam can be tilted to perform 45-degree bevel cuts. This allows contractors to create specialized edges without relying on separate cutting accessories.
The maximum cutting depth is approximately:
- 4.75 inches at 90 degrees
- 2.25 inches at 45 degrees
Wet-Cutting System
The Combicut 350 iPower is equipped with a water-management system designed to support wet cutting. A 9-gallon water pan collects and recirculates water, while the included pump supplies water to the blade area.
Wet cutting helps control blade temperature and carries cutting debris away from the cutting area. The removable pan can also be pulled out to make cleaning and maintenance more convenient.
Product Specifications
| Specification | Details |
|---|---|
| Brand | IMER |
| Model | Combicut 350 iPower |
| Model Number | 1188931 |
| Product Type | Tile, Stone & Masonry Saw |
| Saw Configuration | Overhead-Rail / Bridge Saw |
| Blade Diameter | 14 in. |
| Blade Shaft Diameter | 1 in. |
| Motor Power | 4 HP |
| Motor Voltage | 220V |
| Motor Phase | Single Phase |
| Motor Current | 15 A |
| Blade Speed | 2,800 RPM |
| Maximum Cutting Length | 41.5 in. |
| Maximum Cutting Length with Plunge Cut | 47.25 in. |
| Maximum Cutting Depth | 4.75 in. |
| Maximum Cutting Depth at 45° | Approx. 2.25 in. |
| Water Pan Capacity | 9 gal. |
| Cutting Surface | Stainless Steel |
| Protractor | 180° |
| Stand | Integrated, with Wheel Kit |
| Blade Included | 14-in. General-Purpose Blade |
| Water Pump | Included |
| Operating Dimensions | 69 × 30 × 55.5 in. |
| Boxed Dimensions | Approx. 70 × 30.5 × 60.5 in. |
| Weight | 265 lb. |
| Shipping / Boxed Weight | Approx. 300 lb. |
| Noise Level | Less than 75 dB |
Specifications are based primarily on IMER USA's current product page and product sheet.
Stainless-Steel Cutting Surface
The saw features a stainless-steel cutting surface designed for long, precise cuts. IMER specifies a 48-inch cutting length for the stainless-steel work surface, providing substantial support for larger workpieces.
The durable surface is well suited to demanding construction environments where the saw may be exposed to water, slurry, and abrasive materials.
Integrated Stand and Wheel Kit
The Combicut 350 iPower includes an integrated stand with a wheel kit. The spring-loaded stand is designed to assist with setup and can be folded out of the way for transportation and storage.
Because the assembled saw weighs approximately 265 pounds, the wheel system is particularly useful when positioning the machine around a work area.
Recommended Applications
The IMER Combicut 350 iPower is suitable for professional cutting applications involving:
Tile & Porcelain
- Large-format ceramic tile
- Porcelain tile
- Hard tile
- Thick tile products
Stone
- Natural stone
- Marble
- Granite
- Other compatible stone materials
Masonry
- Brick
- Pavers
- Concrete-based products
- Masonry materials
IMER describes the machine as suitable for tile and stone installers, masons, precast fabricators, landscapers, and general contractors.
Easy Setup and Cleanup
Several design features are intended to reduce preparation and cleanup time:
- Spring-loaded integrated stand
- Wheel kit for movement
- Removable water pan
- Stainless-steel cutting surface
- Integrated water-management system
- 180-degree protractor
- Included general-purpose blade
The removable water pan can be slid out for easier cleaning after wet cutting operations.
Blade Compatibility
The saw accepts 14-inch blades with a 1-inch blade shaft. The standard package includes a 14-inch general-purpose blade, allowing the machine to be used immediately for appropriate applications after proper setup.
IMER also lists specialized replacement blade options for applications such as porcelain and hard materials, masonry, concrete, and stone. This allows the operator to select a blade based on the material being cut rather than relying on a single blade for every job.
Maintenance Considerations
To maintain cutting accuracy and extend equipment life:
- Inspect the diamond blade before every use.
- Keep the blade mounting area clean.
- Maintain adequate water flow during wet cutting.
- Clean the water pan and remove accumulated cutting slurry.
- Inspect the travel system for debris that could interfere with smooth movement.
- Check the belt and drive components periodically.
- Keep electrical connections protected from water.
- Follow IMER's maintenance intervals and operating instructions.
Why Choose the IMER Combicut 350 iPower?
The IMER Combicut 350 iPower is designed for professionals who need more than a basic tile saw. Its combination of a 4 HP high-torque motor, 14-inch blade capacity, long cutting range, overhead travel system, bevel capability, integrated stand, and wet-cutting system makes it a versatile machine for demanding construction and fabrication work.
With a maximum straight cutting length of 41.5 inches and up to 47.25 inches with plunge cutting, it provides the capacity needed for many large-format tile and stone applications while maintaining the guided cutting approach expected from a professional bridge saw.
What's Included
The standard IMER package includes:
- IMER Combicut 350 iPower saw
- 4 HP, 220V single-phase motor
- 14-inch general-purpose blade
- Integrated stand
- Wheel kit
- 180-degree protractor
- High-flow water pump
- Stainless-steel cutting surface
- Removable high-impact poly water pan with baffle
Important Buying Note
The Combicut 350 iPower is a substantial professional saw, weighing approximately 265 pounds before packaging. Buyers should ensure that the installation area can accommodate its approximately 69 × 30 × 55.5-inch operating dimensions and that an appropriate 220V, 15-amp single-phase electrical supply is available.
Before purchasing replacement blades, verify the 14-inch diameter and 1-inch shaft/arbor requirements. For specialized materials such as porcelain, granite, or hard stone, selecting the appropriate diamond blade is important for achieving the desired cutting speed, finish, and blade life.