Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
PFC JX Series 1/2HP 115V Corrosion Resistant Pump
- $1,229.00
- Brands PFC Equipment
- Product Code: 201223
- Availability: In Stock
PFC Equipment JX Series Chemical Corrosion Resistant 1/2HP 115V Dewatering Sump PumpThe PFC Equipment JX Series 1/2 HP 115V Dewatering Sump Pump is a corrosion-resistant submersible pump designed for demanding dewatering applications where ordinary cast-iron pumps may not provide adequate protection against aggressive liquids. Built around the JX Series design, this pump uses 316 stainless steel f..
Chemical Resistant Dewatering Pump for Industrial Applications
PFC Equipment JX Series Chemical Corrosion Resistant 1/2HP 115V Dewatering Sump Pump
The PFC Equipment JX Series 1/2 HP 115V Dewatering Sump Pump is a corrosion-resistant submersible pump designed for demanding dewatering applications where ordinary cast-iron pumps may not provide adequate protection against aggressive liquids. Built around the JX Series design, this pump uses 316 stainless steel for wetted metal components and FKM elastomers to improve resistance in corrosive environments.
The JX400SS configuration combines a 0.5 HP single-phase motor with a 2-inch side discharge and is suited to sump dewatering, corrosive sumps, effluent handling, and similar applications where reliable submersible pumping is required. The pump also incorporates multiple layers of motor and seal protection for demanding service conditions.
Key Features
Corrosion-resistant 316 stainless steel construction: Metal components exposed to the pumped liquid are made from 316 stainless steel.
0.5 HP motor: Provides practical pumping performance for smaller industrial dewatering applications.
115V single-phase power: Designed for the 115V electrical configuration.
2-inch side discharge: Provides a common connection size for dewatering systems.
33-foot power cord: The extended cord helps provide additional reach during pump installation.
FKM elastomers: Gaskets and O-rings use FKM material for improved chemical resistance.
Double mechanical seals: The motor uses separate upper and lower mechanical seals for added protection.
Silicon carbide lower seal: The lower mechanical seal uses silicon carbide/silicon carbide construction for wear resistance.
Additional lip seal: Helps keep dirt, silt, and sand away from the mechanical seal chamber.
Class F motor insulation: The motor insulation is rated to allow winding temperatures up to 230°F.
Automatic thermal and overload protection: The pump can shut down when motor temperature or current draw becomes excessive and automatically restart after cooling.
Submersible design: Intended for operation while submerged in appropriate pumping applications.
High corrosion resistance: Particularly useful in environments where corrosive liquids can quickly damage conventional pump materials.
Built for Corrosive Dewatering
The JX Series is designed around a corrosion-resistant construction rather than simply adding a protective coating to conventional pump materials. Industrial Flow Solutions specifies cast 316 stainless steel for the JX Series, while PFC Equipment identifies the wetted metal components of this configuration as 316 stainless steel. This makes the pump suitable for applications involving corrosive sumps and other environments where material compatibility is important.
Because chemical compatibility depends on the exact liquid, concentration, temperature, and exposure conditions, the pump's materials should always be checked against the fluid being pumped before installation.
Multi-Layer Seal Protection
The pump uses a three-level approach to protecting the motor and seal chamber. A lower silicon-carbide mechanical seal is paired with an upper carbon/ceramic seal, while an additional lip seal helps limit the entry of abrasive contaminants such as sand, silt, and dirt. This arrangement is intended to reduce contamination-related wear and help extend seal service life.
Motor Protection
The JX configuration includes built-in winding protection and NEMA Class F insulation. An automatic switch monitors operating conditions and can shut the motor down if temperature or amperage rises beyond the acceptable range. Once the motor cools, the switch automatically resets and the pump can resume operation.
Typical Applications
The PFC Equipment JX Series pump can be used for applications such as:
Sump dewatering
Corrosive sump drainage
Effluent dewatering
Chemical spill and collection sumps
Industrial water removal
Wastewater-related pumping
Metal-finishing environments
Industrial facilities requiring corrosion-resistant dewatering equipment
The JX Series is specifically positioned for applications including effluent dewatering, corrosive sumps, chemical spills, bottling plants, metal finishing, leachate recovery, and retention sumps.
Product Specifications
| Specification | Details |
|---|---|
| Brand | PFC Equipment |
| Series | JX Series |
| Model | JX400SS |
| Product / OEM Part Number | 201223 |
| Pump Type | Submersible dewatering sump pump |
| Construction | Corrosion-resistant |
| Motor Power | 1/2 HP / 0.5 HP |
| Motor Rating | 0.4 kW |
| Voltage | 115V |
| Phase | Single-phase |
| Frequency | 60 Hz |
| Full Load Amperage | 7.6 A |
| Discharge Size | 2 in. NPT male |
| Maximum Flow | 54 GPM |
| Maximum Head | 40 ft |
| Maximum Solids | 0.12 in. / 3 mm |
| Motor Speed | 3,450 RPM |
| Impeller Material | 316 stainless steel |
| Wetted Metal Components | 316 stainless steel |
| Elastomers | FKM |
| Lower Mechanical Seal | Silicon carbide / silicon carbide |
| Upper Mechanical Seal | Carbon / ceramic |
| Motor Insulation | NEMA Class F |
| Power Cord | 33 ft |
| Approx. Pump Weight | 38 lb |
| Discharge Style | Side discharge |
| Certification | CSA |
| UPC | 410040000111 |
The current Industrial Flow Solutions specification lists the JX400SS at 0.5 HP, 115V, single-phase/60 Hz, 7.6 A, 2-inch NPT-M discharge, 38.1 lb, 40 ft maximum head, 54 GPM maximum flow, and 0.12-inch maximum solids capability. Acme's listing for PFC Equipment SKU 201223 also identifies the pump as 0.5 HP, 115V, 7.6 A, 66 GPM capacity, 2-inch outlet, 33-foot cord, and 38 lb assembled weight.
Specification note: Published flow figures can differ depending on how the seller describes the pump's hydraulic capacity or operating point. The current manufacturer table identifies 54 GPM as the JX400SS maximum flow, so that figure is used as the primary technical specification here.
Package Contents
1 × PFC Equipment JX Series Chemical Corrosion Resistant Dewatering Sump Pump
Model: JX400SS
Part Number: 201223
Why Choose the JX Series?
For demanding dewatering work, the JX Series focuses on durability where conventional pumps can be vulnerable. Its 316 stainless steel wetted construction, FKM elastomers, multi-stage seal protection, thermal protection, and extended 33-foot power cord make it well suited to industrial environments where corrosion resistance and dependable operation are important.
Before pumping any chemical or corrosive liquid, verify material compatibility with the manufacturer and the specific fluid's concentration and temperature. The pump should also be installed and operated according to the applicable manufacturer's instructions and electrical requirements.