Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
JET MT100‑4 1 Ton Electric 2 Speed Trolley
- $972.00
- Brands JET
- Product Code: 144185
- Availability: In Stock
JET MT100-4 1-Ton Electric 2-Speed Trolley 3-Phase 460VProduct OverviewThe JET MT100-4 is a compact, heavy-duty electric trolley designed to provide powered horizontal movement for loads up to 1 ton (2,000 lb). Operating on 460V, 3-phase power, it is intended for industrial material-handling applications where controlled load movement and reliable trolley travel are required.Its two-speed travel s..
Features of JET MT100‑4 1 Ton Electric Trolley
JET MT100-4 1-Ton Electric 2-Speed Trolley 3-Phase 460V
Product Overview
The JET MT100-4 is a compact, heavy-duty electric trolley designed to provide powered horizontal movement for loads up to 1 ton (2,000 lb). Operating on 460V, 3-phase power, it is intended for industrial material-handling applications where controlled load movement and reliable trolley travel are required.
Its two-speed travel system provides a high-speed setting for moving loads efficiently and a slower speed for more precise positioning. The MT100-4 is designed to work with compatible JET electric hoists and properly rated overhead beams or runway systems.
Key Features
1-ton / 2,000 lb rated capacity for industrial material handling.
460V, 3-phase operation for compatible industrial electrical systems.
Two-speed travel provides flexibility between rapid movement and controlled positioning.
79 FPM high-speed travel allows efficient movement along the runway.
20 FPM low-speed travel provides greater control during load positioning.
0.8 HP high-speed motor and 0.2 HP low-speed motor provide dedicated drive power for each travel mode.
5–7 inch standard beam flange range accommodates compatible overhead beams.
Approximately 78.7-inch minimum curve radius helps determine suitable runway configurations.
1-1/2-inch wheel diameter provides appropriate support for the trolley's rated capacity.
Approximately 5-inch wheel-to-hook mounting dimension helps reduce the amount of overhead clearance required.
IP55 trolley protection rating provides protection within its specified enclosure classification.
IP65 pendant protection rating provides enhanced protection for the control pendant.
Designed for use with compatible JET TS Series electric hoists.
Heavy-duty construction makes it suitable for demanding industrial environments.
Specifications
| Specification | Details |
|---|---|
| Brand | JET |
| Model | MT100-4 |
| Stock Number | 144187 |
| Product Type | Electric 2-Speed Trolley |
| Rated Capacity | 1 Ton / 2,000 lb |
| Voltage | 460V |
| Phase | 3 Phase |
| Frequency | 60 Hz |
| High Travel Speed | 79 FPM / 24 MPM |
| Low Travel Speed | 20 FPM / 6 MPM |
| High-Speed Motor | 0.8 HP |
| Low-Speed Motor | 0.2 HP |
| Standard Flange Width | 5–7 in. / 125–175 mm |
| Minimum Curve Radius | 78.7 in. / approximately 6.56 ft. |
| Wheel Diameter | 1-1/2 in. |
| Wheel-to-Hook Mounting | Approximately 5 in. |
| Trolley Protection Rating | IP55 |
| Pendant Protection Rating | IP65 |
| Construction | Heavy-Duty Steel |
| Compatible Hoist Series | JET TS Series |
| Operation | Electric |
| Travel Control | Two Speed |
| Warranty | 2-Year Limited |
Specifications are based on JET's MT-series documentation and product information for the MT100-4 1-ton, 460V, 3-phase configuration. Confirm the exact stock number and current manufacturer specification before ordering.
Two-Speed Travel
The MT100-4 is designed to provide two different travel speeds for better control of overhead loads. The 79 FPM high-speed setting allows the operator to move loads efficiently along the runway, while the 20 FPM low-speed setting is useful when positioning a load near equipment, workstations, storage areas, or loading points.
This dual-speed arrangement provides a practical combination of productivity and positioning accuracy.
1-Ton Load Capacity
With a rated capacity of 1 ton (2,000 lb), the MT100-4 is designed for moving moderate-to-heavy loads horizontally when paired with a compatible lifting hoist.
The trolley uses a 0.8 HP high-speed motor and a 0.2 HP low-speed motor to drive its two travel modes. The 2,000 lb rated capacity must not be exceeded. The complete overhead lifting system—including the hoist, beam, runway, connections, and supporting structure—must also be properly rated for the intended load.
Adjustable Beam Fit
The MT100-4 accommodates standard beam flange widths from approximately 5 to 7 inches (125–175 mm). This adjustable design allows the trolley to be configured for compatible overhead beams within the specified range.
Before installation, verify the beam's flange dimensions and load rating. Wider flange applications may require optional extension components where supported by the particular JET configuration.
Compact Headroom Design
The trolley's approximately 5-inch wheel-to-hook mounting dimension helps keep the connected hoist relatively close to the supporting beam. This compact arrangement can be useful in workshops and production areas where vertical clearance is limited.
The 1-1/2-inch wheels are designed to provide powered travel along a suitable runway or beam.
Industrial Protection
The MT100-4 is specified with an IP55 trolley protection rating, while its control pendant carries an IP65 rating. These enclosure classifications provide protection against dust and water exposure within the limits of their respective ratings.
The trolley should be installed and operated according to JET's instructions and within the environmental conditions specified for the complete lifting system.
Hoist Compatibility
The MT100-4 is designed to be paired with compatible JET TS Series electric hoists. The hoist performs the vertical lifting function while the trolley provides powered horizontal movement.
The MT100-4 should therefore be considered one component of an overhead lifting system rather than a standalone lifting machine. A suitable hoist, properly rated beam or runway, appropriate electrical supply, and correct installation are required.
Typical Applications
The JET MT100-4 is suitable for:
Manufacturing facilities
Machine shops
Metal fabrication
Industrial maintenance
Warehouses
Equipment handling
Production material movement
Heavy-load positioning
Repair and service areas
General overhead material handling
Why Choose the JET MT100-4?
The JET MT100-4 1-Ton Electric 2-Speed Trolley combines a 2,000 lb capacity, 460V three-phase operation, and two-speed travel in a compact industrial design. Its 79/20 FPM travel speeds give operators the flexibility to move loads quickly while retaining a slower setting for more controlled positioning.
With its adjustable 5–7 inch beam flange range, compact headroom design, IP-rated construction, and compatibility with JET TS Series hoists, the MT100-4 is a practical solution for powered horizontal load movement in industrial environments.