Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Jet JTJ 10ST 10 Ton Hydraulic Toe Jack
- $369.00
- Brands JET
- Product Code: 454510
- Availability: In Stock
JET JTJ-10ST 10 Ton Hydraulic Toe Jack The JET JTJ-10ST 10 Ton Hydraulic Toe Jack is a heavy-duty industrial lifting tool designed for raising heavy machinery, equipment, structural components, and other loads where conventional jacks may not provide enough clearance. Its low-profile toe can reach underneath loads positioned close to the floor, while the upper head provides a second lifting point..
10 Ton Hydraulic Toe Jack for Heavy Duty Lifting and Maintenance
JET JTJ-10ST 10 Ton Hydraulic Toe Jack
The JET JTJ-10ST 10 Ton Hydraulic Toe Jack is a heavy-duty industrial lifting tool designed for raising heavy machinery, equipment, structural components, and other loads where conventional jacks may not provide enough clearance. Its low-profile toe can reach underneath loads positioned close to the floor, while the upper head provides a second lifting point when greater clearance is available.
With a 10-ton toe capacity, 14-ton head capacity, and hydraulic operation, the JTJ-10ST is suited to machinery installation, plant maintenance, equipment relocation, house moving, shipyard work, bridge construction, and other demanding lifting applications. JET also specifies an overload-protection valve and construction features intended for reliable industrial service.
Key Features
- 10-ton toe lifting capacity — Provides substantial lifting capability from low-clearance positions.
- 14-ton head capacity — Allows the jack to lift heavier loads when using the upper lifting point.
- Dual-purpose design — Can lift from either the low-position toe or upper head.
- Low-profile toe — Minimum toe height of approximately 1-7/32 inches, making it suitable for loads with limited ground clearance.
- Hydraulic operation — Provides controlled lifting with manual pumping.
- Overload protection valve — Helps prevent lifting beyond the jack's rated capacity.
- Electric-welded base and cylinder — Designed to reduce potential leak points and improve durability.
- Heat-treated piston — Helps resist corrosion and supports long-term service.
- Swivel socket — Allows more flexible handle positioning and multidirectional operation.
- Multi-purpose capability — Suitable for lifting, pushing, spreading, bending, pressing, and straightening applications when properly configured.
- Pump handle included — Ready for manual hydraulic operation.
- ANSI/ASME B30.1 compliant — Designed in accordance with the applicable jack safety standard.
Product Specifications
| Specification | Details |
|---|---|
| Brand | JET |
| Model | JTJ-10ST |
| Product Type | Hydraulic Toe Jack |
| Toe Capacity | 10 tons |
| Head Capacity | 14 tons |
| Minimum Toe Height | 1-7/32 in. |
| Maximum Toe Height | 6-15/16 in. |
| Toe Lift | 5-23/32 in. |
| Minimum Head Height | 12-7/8 in. |
| Maximum Head Height | 18-9/16 in. |
| Toe Size (L x W) | 2.72 x 3.3 in. |
| Base Size (L x W) | Approximately 11-9/32 x 9-7/16 in. |
| Overall Dimensions | Approximately 13.5 x 10 x 14 in. |
| Net Weight | Approximately 81 lb. |
| Shipping Weight | Approximately 85.1 lb. |
| Operation | Manual Hydraulic |
| Pump Handle | Included |
| Safety Standard | ANSI/ASME B30.1 |
Published specifications vary slightly between listings—for example, weight is reported as approximately 81 lb. net and 85.1 lb. shipping, while base dimensions are rounded differently by some suppliers. The detailed lifting specifications above are consistent across multiple published JET JTJ-10ST listings.
Low-Profile Toe for Tight Clearances
The JTJ-10ST's main advantage is its low-profile lifting toe. With a minimum toe height of approximately 1-7/32 inches, the jack can be positioned beneath machinery bases, equipment frames, skids, and other loads that sit close to the floor.
The toe provides a maximum lifting height of approximately 6-15/16 inches, with about 5-23/32 inches of toe lift. This makes it particularly useful when equipment needs to be raised enough to install machinery rollers, positioning equipment, shims, or other supports.
Dual Lifting Capability
Unlike a conventional jack designed around a single lifting point, the JTJ-10ST can be used from both the toe and the head.
The toe is intended for low-clearance lifting, while the upper head can be used when the load provides sufficient clearance. The head has a rated capacity of 14 tons, providing additional lifting capability for suitable applications.
This dual-purpose configuration makes the jack useful when clearance conditions change during machinery installation or relocation.
Heavy-Duty Hydraulic Construction
JET designed the JTJ-10ST for demanding industrial environments. Its electric-welded base and cylinder construction is intended to minimize potential leak points, while the heat-treated piston provides improved resistance to corrosion.
A swivel socket also provides flexibility when positioning the pump handle, which can be helpful when working around machinery, walls, frames, or other obstacles.
Overload Protection
The JTJ-10ST incorporates an overload protection valve designed to prevent the jack from lifting loads beyond its rated capacity.
The rated capacity should always be treated as a maximum, not a target. The load must be properly positioned and supported, and the jack should be used only from an appropriate lifting point.
Industrial Applications
The JET JTJ-10ST is well suited for:
- Machinery installation
- Machine relocation
- Industrial equipment maintenance
- Plant construction
- Machinery positioning
- House moving
- Shipyard applications
- Bridge construction
- Building construction
- Heavy equipment setup
- Machinery roller installation
- Equipment leveling and positioning
Its combination of low-clearance access and high lifting capacity makes it particularly valuable for millwrights, machinery movers, industrial maintenance teams, contractors, and fabrication professionals.
Lifting, Pushing, and Positioning
The JTJ-10ST is not limited to conventional vertical lifting. JET describes the JTJ series as capable of lifting, pushing, spreading, bending, pressing, and straightening, provided the application is appropriate for the tool and its rated capacity.
This versatility makes it useful for machinery installation and positioning work where loads may need to be gradually shifted or aligned rather than simply raised vertically.
Safety and Proper Use
The JTJ-10ST is a professional lifting tool and should be used according to its operating instructions and rated capacities. The jack should be placed on a stable, suitable surface, with the toe or head correctly positioned at an approved lifting point.
Never exceed the 10-ton toe capacity or 14-ton head capacity, and do not rely on a hydraulic jack as the sole support for an elevated load when personnel are working beneath it. Use appropriate mechanical supports after lifting whenever required by the application.
Why Choose the JET JTJ-10ST?
The JET JTJ-10ST 10 Ton Hydraulic Toe Jack is designed for situations where a standard jack simply cannot get underneath the load. Its 1-7/32-inch minimum toe height, 10-ton toe capacity, 14-ton head capacity, hydraulic operation, overload protection, welded construction, and dual lifting configuration make it a capable solution for heavy-duty machinery handling.
For industrial maintenance, machinery installation, equipment relocation, and heavy positioning work, the JTJ-10ST provides the combination of low-clearance access, substantial lifting capacity, and versatile hydraulic operation needed for demanding jobs.