Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
JET MT050‑4 1/2 Ton Electric 2 Speed Trolley
- $900.00
- Brands JET
- Product Code: 144183
- Availability: In Stock
JET MT050-4 1/2-Ton Electric 2-Speed Trolley 3-Phase 460VProduct OverviewThe JET MT050-4 is a compact electric trolley designed for powered horizontal movement of loads up to 1/2 ton (1,000 lb). Operating on 460V, 3-phase power, it is intended for industrial material-handling applications where reliable load movement and controlled positioning are required.Its two-speed travel system allows operat..
Features of JET MT050‑4 1/2 Ton Electric Trolley
JET MT050-4 1/2-Ton Electric 2-Speed Trolley 3-Phase 460V
Product Overview
The JET MT050-4 is a compact electric trolley designed for powered horizontal movement of loads up to 1/2 ton (1,000 lb). Operating on 460V, 3-phase power, it is intended for industrial material-handling applications where reliable load movement and controlled positioning are required.
Its two-speed travel system allows operators to move loads efficiently at higher speed and then switch to a slower speed for more precise positioning. The trolley is designed for use with compatible JET electric hoists and properly rated overhead beams or runway systems.
Key Features
1/2-ton / 1,000 lb rated capacity for light-to-medium industrial material handling.
460V, 3-phase operation for compatible industrial electrical systems.
Two-speed travel provides both efficient movement and controlled positioning.
79 FPM high-speed travel helps move loads quickly across the runway.
20 FPM low-speed travel provides better control during final positioning.
0.8 HP high-speed motor and 0.2 HP low-speed motor provide dedicated drive power.
5–7 inch standard beam flange range accommodates compatible overhead beams.
Approximately 78.7-inch minimum curve radius helps determine suitable runway layouts.
1-1/2-inch wheel diameter is designed for the trolley's rated capacity.
Approximately 5-inch wheel-to-hook mounting dimension helps conserve overhead clearance.
IP55 trolley protection rating provides protection within its specified enclosure classification.
IP65 pendant protection rating provides enhanced protection for the control pendant.
Designed for use with compatible JET TS Series electric hoists.
Heavy-duty construction provides a durable solution for industrial load movement.
Specifications
| Specification | Details |
|---|---|
| Brand | JET |
| Model | MT050-4 |
| Product Type | Electric 2-Speed Trolley |
| Rated Capacity | 1/2 Ton / 1,000 lb |
| Voltage | 460V |
| Phase | 3 Phase |
| Frequency | 60 Hz |
| High Travel Speed | 79 FPM / 24 MPM |
| Low Travel Speed | 20 FPM / 6 MPM |
| High-Speed Motor | 0.8 HP |
| Low-Speed Motor | 0.2 HP |
| Standard Flange Width | 5–7 in. / 125–175 mm |
| Minimum Curve Radius | 78.7 in. / approximately 6.56 ft. |
| Wheel Diameter | 1-1/2 in. |
| Wheel-to-Hook Mounting | Approximately 5 in. |
| Trolley Protection Rating | IP55 |
| Pendant Protection Rating | IP65 |
| Construction | Heavy-Duty Steel |
| Compatible Hoist Series | JET TS Series |
| Operation | Electric |
| Travel Control | Two Speed |
Note: Specifications can vary between JET MT-series electrical configurations. Confirm the exact stock number and current manufacturer documentation before ordering or installation.
Two-Speed Travel for Precise Load Movement
The MT050-4 features two travel speeds to give operators greater flexibility when moving suspended loads. The 79 FPM high-speed setting allows the load to travel efficiently along the runway, while the 20 FPM low-speed setting provides slower, more controlled movement during final positioning.
This combination is useful for applications where loads need to be moved quickly between work areas but positioned carefully at the destination.
1/2-Ton Load Capacity
The MT050-4 is rated for loads up to 1,000 lb (1/2 ton). This capacity makes it suitable for handling tools, machinery components, assemblies, and other moderate-weight materials in industrial and maintenance environments.
The trolley uses separate 0.8 HP high-speed and 0.2 HP low-speed motors for its two travel modes. The 1,000 lb rated capacity must not be exceeded, and the complete lifting system must be designed around the capacity of its lowest-rated component.
Adjustable Beam Compatibility
The standard trolley accommodates beam flange widths of approximately 5 to 7 inches (125–175 mm). This adjustment range allows the MT050-4 to be configured for compatible overhead beam dimensions within its specified limits.
Before installation, verify the beam flange width, beam condition, and structural load rating. Any optional flange extensions must be approved for the particular trolley configuration.
Compact Headroom Design
The approximately 5-inch wheel-to-hook mounting dimension helps keep the connected hoist close to the overhead support beam. This can be particularly useful in work areas where vertical clearance is limited.
The trolley's 1-1/2-inch wheels are designed for powered travel along an appropriate overhead beam or runway.
Industrial Protection
The MT050-4 is specified with an IP55 trolley protection rating, while the control pendant is rated IP65. These enclosure classifications provide protection against dust and water exposure within their respective rated limits.
The trolley should be installed and operated according to JET's instructions and only under environmental conditions appropriate for the equipment.
Hoist Compatibility
The MT050-4 is designed for use with compatible JET TS Series electric hoists. The hoist performs the vertical lifting function while the trolley provides powered horizontal movement.
The MT050-4 is therefore a trolley component rather than a complete lifting system. A compatible hoist, properly rated overhead beam or runway, suitable electrical supply, and correct installation are required for operation.
Typical Applications
The JET MT050-4 is suitable for:
Manufacturing facilities
Machine shops
Maintenance departments
Metal fabrication
Equipment repair
Workshops
Warehouses
Tool and component handling
Assembly areas
General overhead material handling
Why Choose the JET MT050-4?
The JET MT050-4 1/2-Ton Electric 2-Speed Trolley provides a practical solution for powered movement of loads up to 1,000 lb. Its 460V three-phase power, 79/20 FPM travel speeds, adjustable 5–7 inch flange range, and compact mounting design make it well suited to a variety of industrial material-handling applications.
When paired with a compatible JET TS Series hoist and a properly engineered overhead support system, the MT050-4 provides controlled, efficient horizontal movement for lighter industrial loads.