Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
IMER Combicut 200VA 110V 1.75HP 8 In Tile Saw
- $655.00
- Brands IMER
- Product Code: 1188084
- Availability: In Stock
IMER Combicut 200VA 110V 1.75 HP 8-Inch Tile, Stone & Porcelain Saw Product Overview The IMER Combicut 200VA is a compact overhead-rail wet saw designed for accurate cutting of tile, porcelain, stone, and other compatible materials. Its 1.75 HP, 110V single-phase motor drives an 8-inch continuous-rim diamond blade, providing a practical combination of cutting power, precision, and portabilit..
Features and Benefits of IMER Combicut 200VA 8 Inch Tile Saw
IMER Combicut 200VA 110V 1.75 HP 8-Inch Tile, Stone & Porcelain Saw
Product Overview
The IMER Combicut 200VA is a compact overhead-rail wet saw designed for accurate cutting of tile, porcelain, stone, and other compatible materials. Its 1.75 HP, 110V single-phase motor drives an 8-inch continuous-rim diamond blade, providing a practical combination of cutting power, precision, and portability.
Designed for smaller professional jobs, the Combicut 200VA offers a 21-inch maximum cutting length, extendable to 24 inches with plunge cutting, while its lightweight 48-pound operating weight makes it easier to transport between job sites. IMER identifies this model as 1188084.
Key Features
- 1.75 HP, 110V motor for dependable job-site cutting performance.
- 8-inch continuous-rim porcelain blade included.
- 21-inch maximum cutting length, or 24 inches with plunge cutting.
- 2.75-inch maximum cutting depth.
- Overhead rail provides controlled and accurate blade movement.
- Tilting travel beam allows 45-degree angled cuts.
- 5-gallon removable water pan with baffles.
- High-flow 3 GPM water pump included.
- 180-degree protractor for accurate angled cuts.
- Included side table provides additional material support.
- Folding stand makes setup, transportation, and storage easier.
- Lightweight design weighs approximately 48 pounds with stand.
Designed for Tile, Stone & Porcelain
The Combicut 200VA is built for contractors and installers who need controlled cutting performance without the size and weight of a larger bridge saw.
Typical applications include:
- Porcelain tile
- Ceramic tile
- Floor and wall tile
- Natural stone
- Decorative stone
- Compatible masonry materials
The included continuous-rim porcelain blade is particularly suited to tile and porcelain work. For harder or more abrasive materials, use a diamond blade specifically designed for that material.
1.75 HP 110V Motor
The saw uses a 1.75 HP, 15-amp single-phase motor. IMER's current technical documentation lists the motor as 120V, while the product is commonly marketed in the 110V configuration specified in the product name. The motor operates the blade at approximately 2,800 RPM.
This electrical configuration is convenient for many residential remodeling and construction environments where standard single-phase power is available.
8-Inch Diamond Blade
The Combicut 200VA accepts an 8-inch blade with a 5/8-inch shaft. The standard machine includes an 8-inch continuous-rim porcelain blade, allowing users to begin appropriate tile and porcelain cutting applications without purchasing a separate blade immediately.
A continuous-rim diamond blade is well suited to applications where a clean, controlled cut is important, particularly on tile and porcelain.
Cutting Capacity
Despite its compact design, the saw provides useful cutting capacity for smaller and medium-sized tile installations.
Maximum Cutting Length
- 21 inches standard
- 24 inches with plunge cutting
Maximum Cutting Depth
- 2.75 inches
The plunge-cut function is useful for making localized cuts, including L-shaped cuts around door jambs and other obstructions. The cutting head pivots on a sealed bushing to provide controlled plunge movement.
45-Degree Angled Cutting
The overhead travel beam can be tilted for 45-degree cuts, allowing installers to create beveled or mitered tile edges.
This capability is useful for:
- Outside corners
- Edge finishing
- Decorative tile installations
- Trim work
- Mitered porcelain edges
The overhead-rail design helps maintain a consistent cutting path as the blade moves across the material.
Wet-Cutting Water System
The Combicut 200VA is designed for wet cutting and includes a 3 GPM high-flow water pump. Water is delivered to the blade to help control heat and carry cutting debris away from the cutting area.
The saw uses a 5-gallon removable polyethylene water pan with baffles, making it easier to collect and recycle cutting water while simplifying cleanup. A water valve allows the operator to control the water mist.
Product Specifications
| Specification | Details |
|---|---|
| Brand | IMER |
| Model | Combicut 200VA |
| Model Number | 1188084 |
| Product Type | Overhead-Rail Wet Tile Saw |
| Primary Applications | Tile, Stone & Porcelain |
| Blade Diameter | 8 in. |
| Blade Shaft Diameter | 5/8 in. |
| Motor Power | 1.75 HP |
| Electrical Rating | 110V / 60 Hz* |
| Motor Current | 15 A |
| Phase | Single Phase |
| Blade Speed | 2,800 RPM |
| Maximum Cutting Length | 21 in. |
| Maximum Cutting Length with Plunge Cut | 24 in. |
| Maximum Cutting Depth | 2.75 in. |
| Bevel Cutting | 45° |
| Water Pan Capacity | 5 gal. |
| Water Pump Flow | 3 GPM |
| Included Blade | 8-in. Continuous-Rim Porcelain Blade |
| Protractor | Up to 180° |
| Side Table | Included |
| Stand | Included |
| Operating Weight | 48 lb. |
| Boxed Weight | 68 lb. |
| Boxed Length | 37 in. |
| Boxed Height | 22 in. |
| Boxed Width | 20 in. |
| Noise Level | Less than 78 dB |
*IMER's current technical specification sheet lists the motor rating as 1.75 HP, 120V, 15 amp, while the model specification/product materials identify the machine as a 110V/60 Hz configuration. Verify the electrical rating on the exact unit or regional SKU before purchase.
Lightweight and Portable Design
Portability is one of the Combicut 200VA's strongest advantages. The machine weighs approximately 48 pounds with the stand, while the boxed weight is approximately 68 pounds.
The included stand makes it possible to set the saw up at a comfortable working height, while the compact overall dimensions make transportation and storage easier than with larger professional bridge saws.
IMER also describes the Combicut 200VA as suitable for professional installers, contractors, rental stores, and DIY users.
Side Table and Protractor
The saw includes a side table that provides additional workspace and material support. This is useful when cutting larger tile pieces that extend beyond the primary cutting surface.
An 180-degree protractor is also included for setting up angled cuts. The cast-aluminum protractor is designed to provide a stable reference for repeatable rip and angle cuts.
Optional Tile Clamp
For applications where additional material stability is required, IMER offers a dedicated tile clamping system, part number 1188157. The accessory attaches to Combicut Series saws and can help hold the tile securely during cutting.
This can be particularly useful when accuracy is critical or when cutting larger pieces within the saw's capacity.
Recommended Applications
Tile & Porcelain
The included continuous-rim blade makes the saw well suited for:
- Ceramic tile
- Porcelain tile
- Floor tile
- Wall tile
- Decorative tile
- Smaller-format large tile
Stone
With an appropriately rated diamond blade, the saw can be used for compatible:
- Natural stone
- Marble
- Other stone products
Remodeling
The compact design and plunge-cut capability make it useful for:
- Bathroom remodeling
- Kitchen renovations
- Flooring projects
- Tile replacement
- Door-jamb cuts
- Trim and edge work
Maintenance Tips
To maintain cutting accuracy and extend the service life of the machine:
- Inspect the diamond blade before every use.
- Check that the blade is properly secured.
- Maintain adequate water flow during cutting.
- Clean the water pan regularly.
- Remove accumulated tile slurry from the pan and cutting surface.
- Keep the overhead rail and cutting mechanism free of debris.
- Inspect the water pump and hose periodically.
- Check the electrical cord for damage.
- Replace worn or damaged blades promptly.
Always follow IMER's operating and maintenance instructions.
Safety Considerations
Before operating the Combicut 200VA:
- Set the saw on a stable, level surface.
- Confirm that the correct 8-inch blade is securely installed.
- Check that the blade guard is correctly positioned.
- Ensure sufficient water reaches the blade.
- Keep hands away from the rotating blade.
- Wear appropriate eye and hearing protection.
- Use suitable dust-control and respiratory protection when required.
- Disconnect electrical power before changing the blade or performing maintenance.
- Never exceed the blade's rated operating speed.
Why Choose the IMER Combicut 200VA?
The IMER Combicut 200VA 8-Inch Tile Saw is a practical option for professionals who need an accurate, portable wet saw for smaller tile and stone projects.
Its 1.75 HP motor, 8-inch continuous-rim porcelain blade, 21-inch cutting capacity, 24-inch plunge-cut capacity, 45-degree bevel capability, 3 GPM water pump, folding stand, side table, and 48-pound operating weight give it a strong balance between portability and professional functionality.
What's Included
The standard Combicut 200VA package includes:
- IMER Combicut 200VA saw
- 8-inch continuous-rim porcelain blade
- 1.75 HP electric motor
- Folding stand
- Side table
- 180-degree protractor
- High-flow water pump
- Removable 5-gallon water pan with baffles
The optional tile clamp is not included as standard and is available separately.
Important Buying Note
The IMER Combicut 200VA is a compact 8-inch overhead-rail saw, so buyers should verify that its 21-inch standard cutting length and 2.75-inch cutting depth meet the requirements of their intended project.
Also confirm the electrical specification on the exact unit before purchase because IMER's published materials use both 110V/60 Hz and 120V, 15-amp terminology for this model. The manufacturer's current technical documentation identifies model 1188084 and the 8-inch, 1.75 HP configuration.