Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with Juna Tools!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
ICS 680ES GC Gas Concrete Saw 12 In Guidebar Package
- $767.00
- Brands ICS
- Product Code: 576154
- Availability: In Stock
ICS 680ES GC Gas Saw Package with 12-Inch Guide Bar and FORCE3 Chain Product Overview The ICS 680ES GC Gas Saw Package with 12-Inch Guide Bar and FORCE3 Chain is a professional concrete-cutting system designed for general construction, renovation, masonry, and utility work. It combines the ICS 680ES gasoline-powered saw with a 12-inch (30 cm) GC guide bar and FORCE3 diamond chain for controlled,..
High Performance Concrete Cutting with FORCE3 Chain
ICS 680ES GC Gas Saw Package with 12-Inch Guide Bar and FORCE3 Chain
Product Overview
The ICS 680ES GC Gas Saw Package with 12-Inch Guide Bar and FORCE3 Chain is a professional concrete-cutting system designed for general construction, renovation, masonry, and utility work. It combines the ICS 680ES gasoline-powered saw with a 12-inch (30 cm) GC guide bar and FORCE3 diamond chain for controlled, deep cutting in concrete and other mineral materials.
The 680ES is designed around a 76.5 cc, 2-stroke gasoline engine and can make cuts up to 14 inches (35 cm) deep, depending on the cutting configuration and material. ICS specifically positions the model as a versatile general-purpose gas power cutter.
Key Features
- 76.5 cc 2-stroke gasoline engine delivers portable cutting power.
- 5.0 horsepower engine output.
- Includes a 12-inch / 30 cm GC guide bar.
- Supplied with a FORCE3 diamond chain.
- Capable of cutting to depths of up to 14 inches / 35 cm.
- Designed for wet cutting with a minimum recommended water pressure of 20 psi.
- Polyester air filter is designed specifically for wet-cutting applications.
- Multifunction lever controls choke, throttle advance, run, and stop functions.
- Extended drive-sprocket adapter simplifies chain assembly.
- Can produce square openings as small as approximately 4 x 4 inches (10 x 10 cm).
FORCE3 Diamond Chain
The included 12-inch FORCE3 chain is a general-purpose diamond chain intended for everyday concrete-cutting work. ICS specifies the 12-inch chain with 58 drive links and a 3/8-inch pitch.
It is suitable for materials including concrete, light-to-medium aggregate, rebar, brick, block, masonry, stone, and asphalt. For particularly hard concrete or heavy reinforcement, a FORCE3 Premium configuration may be more appropriate.
12-Inch Guide Bar
The included 12-inch (30 cm) GC guide bar provides a compact cutting setup while retaining the deep-cutting capability of the ICS diamond-chain system.
The 680ES can accommodate FORCE3 guide-bar and chain configurations up to 14 inches (35 cm), giving contractors flexibility to change cutting configurations when a different reach is required.
Product Specifications
| Specification | Details |
|---|---|
| Brand | ICS |
| Model | 680ES GC |
| Product Type | Gas-Powered Diamond-Chain Concrete Saw |
| Power Source | Gasoline |
| Engine Type | 2-Stroke, Single-Cylinder, Air-Cooled |
| Engine Displacement | 76.5 cc |
| Rated Engine Power | 5.0 hp |
| Maximum Engine Speed | 11,500 ± 500 rpm |
| Idle Speed | 2,800–3,200 rpm |
| Fuel Mix | 50:1 fuel-to-oil |
| Fuel Capacity | 0.88 L / 0.23 gal |
| Guide Bar Length | 12 in. / 30 cm |
| Included Chain | FORCE3 Diamond Chain |
| Chain Pitch | 3/8 in. |
| Included Chain Drive Links | 58 |
| Maximum Cutting Depth | Up to 14 in. / 35 cm |
| Water Pressure | Minimum 20 psi |
| Water Flow | Approximately 2 gpm |
| Saw-Only Weight | 21 lb / 9.6 kg |
| Primary Applications | Concrete, Masonry, Brick, Block, Stone, Asphalt |
| Intended Use | Professional / Commercial |
Specifications are based on current ICS product documentation. Manufacturer specifications may change without notice.
Recommended Applications
The ICS 680ES GC package is suitable for:
- Concrete wall openings
- Reinforced-concrete cutting
- Plumbing penetrations
- Electrical conduit openings
- HVAC penetrations
- Brick and block cutting
- Masonry work
- Stone cutting
- Asphalt cutting
- Construction and renovation
- Utility installations
- General contractor applications
Its ability to create deep, narrow cuts makes it particularly useful when a conventional cut-off saw cannot reach the required depth.
Designed for Wet Cutting
The 680ES is designed around wet-cutting operation. ICS specifies a minimum water pressure of 20 psi, while product documentation lists approximately 2 gallons per minute of water flow.
Adequate water supply helps cool the diamond chain and guide bar while controlling dust and carrying cutting debris away from the cutting area. Insufficient water can contribute to excessive chain wear and chain stretch.
Easy-Start and Operator-Friendly Design
The 680ES incorporates a multifunction lever that manages the saw's choke, throttle advance, run, and stop functions. ICS also uses specially developed carburetion and ignition systems intended to support reliable starting and consistent operation across different elevations.
The polyester air filter is designed for wet-cutting environments, while the extended drive-sprocket adapter helps simplify chain installation.
Cutting Performance
The 12-inch guide-bar configuration provides a practical combination of maneuverability and cutting reach. The 680ES can achieve cuts up to 14 inches (35 cm) deep, making it useful for applications involving substantial concrete sections or deep wall openings.
Actual cutting speed depends on concrete hardness, aggregate composition, reinforcement, chain condition, water supply, chain tension, and operator technique.
Maintenance Considerations
For reliable performance, regularly inspect:
- Diamond chain condition
- Chain tension
- Guide-bar rails and groove
- Drive sprocket
- Water ports and hose
- Air filter
- Spark plug
- Fuel system
The chain should move freely around the guide bar without being excessively tight. ICS recommends maintaining adequate water pressure to help prevent premature chain wear and stretch.
Why Choose the ICS 680ES GC?
The ICS 680ES GC Gas Saw Package is a strong choice for contractors looking for a portable, general-purpose diamond-chain saw. Its combination of a 76.5 cc / 5.0 hp engine, 12-inch guide bar, FORCE3 diamond chain, and up to 14-inch cutting depth makes it capable of handling a broad range of concrete and masonry jobs.
The compact 12-inch configuration is particularly useful where maneuverability matters, while the diamond-chain design provides deep-cutting capability that conventional saws may not offer.
What's Included
- ICS 680ES GC gasoline power cutter
- 12-inch / 30 cm GC guide bar
- FORCE3 diamond chain
The documented 12-inch FORCE3 chain is 3/8-inch pitch with 58 drive links.
Important Buying Note
This is a professional diamond-chain concrete-cutting saw, not a conventional wood-cutting chainsaw. The included FORCE3 chain is designed for mineral materials and should be operated with the proper water supply.
For replacement chains or guide bars, match the chain length, pitch, drive-link count, guide-bar configuration, and drive sprocket to the 680ES GC system. ICS identifies the 12-inch FORCE3 configuration as compatible with the 680ES-GC and 695XL-GC gas saws.